Alpine CDA-W560EG Manual Do Utilizador
16
-EN
Radio Operation
Listening to Radio
1
Press SOURCE/POWER to select the TUNER
mode.
mode.
The aerial will extend when the TUNER mode is set. (Only
on cars equipped with a power aerial.)
on cars equipped with a power aerial.)
2
Press BAND to select the band.
3
Press g , f or
,
to search for a
desired broadcast station (frequency).
g f:
Manual mode
Press and hold to change the
frequency continuously.
Press and hold to change the
frequency continuously.
:
Local mode (SEEK)
:
Distance mode (DX SEEK)
(Press and hold)
• Manual mode:
The frequency is manually tuned in steps (Manual tuning).
• Local mode:
Only strong stations will be automatically tuned in (Automatic Seek
Tuning).
Tuning).
• Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
(Automatic Seek Tuning).
Manual Storing of Station Presets
1
See “Listening to Radio” and set the frequency to
that of the desired broadcast station.
that of the desired broadcast station.
2
Press FOLDER/PRESET and within 10 seconds
press / or -, select
press / or -, select
P-MEMO mode, and press
-/J / ENT..
3
Within 10 seconds press / or -, select the
number (1 to 6) that you would like to store, and
press -/J / ENT..
number (1 to 6) that you would like to store, and
press -/J / ENT..
The blinking display will change to steady and the
broadcast station will be stored.
broadcast station will be stored.
• A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a
station, the current station will be cleared and replaced with the
new station.
new station.
Automatic Memory of Station Presets
1
Press BAND to display the band you wish to
receive.
receive.
2
Press FOLDER/PRESET and within 10 seconds
press / or -, select
press / or -, select
A-MEMO mode, and press
-/J / ENT..
The tuner will automatically seek and store 6 strong
stations in the selected band. They will be stored into
buttons 1 to 6 in order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in preset location no. 1.
stations in the selected band. They will be stored into
buttons 1 to 6 in order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in preset location no. 1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
SOURCE/POWER
FOLDER/PRESET
BAND
FM1
FM2
AM
P-MEMO A-MEMO
FM1-- 3
FM1-- 3
FM1
FM2
AM
P-MEMO A-MEMO
f
g
/ / -
-/J / ENT.
TUNER
TAPE
CD
CHANGER*
(* Only when the changer is connected)
(SEARCH)