JVC KD-G331 Manual Do Utilizador

ENGLISH

15

•  If you want to know more about RDS, visit 

<http://www.rds.org.uk>.

•  The Non-DVD side of a “DualDisc” does not comply 

with the “Compact Disc Digital Audio” standard. 
Therefore, the use of Non-DVD side of a DualDisc on 
this product may not be recommended.

•  This unit has been designed to reproduce CDs/CD 

Texts, and CD-Rs (Recordable)/CD-RWs (Rewritable) 
in audio CD (CD-DA), MP3 and WMA formats.

•  MP3 and WMA “tracks” (words “file” and “track” are 

used interchangeably) are recorded in “folders.”

•  While fast-forwarding or reversing on an MP3 or 

WMA disc, you can only hear intermittent sounds.

•  Use only “finalized” CD-Rs or CD-RWs.
•  This unit can play back only files of the same type 

which are first detected if a disc includes both audio 
CD (CD-DA) files and MP3/WMA files.

•  This unit can play back multi-session discs; however, 

unclosed sessions will be skipped while playing.

•  Some CD-Rs or CD-RWs may not be played back on 

this unit because of their disc characteristics, or for 
the following reasons:

  – Discs are dirty or scratched.
  – Moisture condensation occurs on the lens inside 

the unit.

  – The pickup lens inside the unit is dirty.
  – CD-R/CD-RW on which the files are written with 

“Packet Write” method.

  – There are improper recording conditions (missing 

data, etc.) or media conditions (stained, scratched, 
warped, etc.).

•  By pressing SOURCE on the unit, you can also turn on 

the power. If the source is ready, playback also starts.

•  If you turn off the power while listening to a disc, disc 

play will start from where playback has been stopped 
previously, next time you turn on the power.

•  During SSM search...
  – All previously stored stations are erased and 

stations are stored newly.

  – Received stations are preset in No. 1 (lowest 

frequency) to No. 6 (highest frequency).

  – When SSM is over, the station stored in No. 1 will 

be automatically tuned in.

•  When storing a station manually, the previously 

preset station is erased when a new station is stored 
in the same preset number.

•  Network-Tracking Reception requires two types of 

RDS signals—PI (Programme Identification) and AF 
(Alternative Frequency) to work correctly. Without 
receiving these data correctly, Network-Tracking 
Reception will not operate correctly.

•  If a Traffic Announcement is received by TA Standby 

Reception, the volume level automatically changes to 
the preset level (TA VOL) if the current level is lower 
than the preset level.

•  When Alternative Frequency Reception is activated 

(with AF selected), Network-Tracking Reception is 
also activated automatically. On the other hand, 
Network-Tracking Reception cannot be deactivated 
without deactivating Alternative Frequency 
Reception. (See page 12.)

EN12-19_KD-G333_003A_f.indd   15

EN12-19_KD-G333_003A_f.indd   15

9/5/06   7:06:49 PM

9/5/06   7:06:49 PM