Kenwood KDC-U7046BT Manual Do Utilizador

English

   

|

   

2WARNING
To prevent injury or fire, take the following 
precautions:

•  To prevent a short circuit, never put or leave any 

metallic objects (such as coins or metal tools) inside 
the unit.

This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the 
Demonstration mode. Refer to <Exit Demonstration 
Mode> (page 4).

•  If the unit fails to operate properly, press 

the Reset button. The unit returns to factory 
settings when the Reset button is pressed. 

If the faceplate of this unit is stained, wipe it with a 
clean soft dry such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with 
a cloth moistened with a neutral cleaner, then wipe it 
again with a clean soft dry cloth.
Applying spray cleaner directly to the unit may affect 
its mechanical parts. Wiping the faceplate with a 
hard cloth or using a volatile liquid such as thinner or 
alcohol may scratch the surface or erase characters.

•  To prevent deterioration, do not touch the terminals 

of the unit and faceplate with your fingers.

•  If the terminals on the unit or faceplate get dirty, 

wipe them with a clean soft dry cloth.

When you turn on the car heater in cold weather, 
dew or condensation may form on the lens in the 
CD player of the unit. Called lens fogging,  this 
condensation on the lens may not allow CDs to play. 
In such a situation, remove the disc and wait for the 
condensation to evaporate. If the unit still does not 
operate normally after a while, consult your Kenwood 
dealer.

•  If you experience problems during installation, 

consult your Kenwood dealer.

•  When you purchase optional accessories, check with 

your Kenwood dealer to make sure that they work 
with your model and in your area.

•  Characters that conform to ISO 8859-1 can be 

displayed.

•  To display characters in the following language, 

additional setting is required. 

 

- Chinese

Refer to 

32 Chinese language setting of <Function 

setting> (page 15).

 

- Arabic
- Persian
- Thai
Refer to 

33 Language setting of <Function setting> 

(page 15).

•  The illustrations of the display and the panel 

appearing in this manual are examples used to 
explain more clearly how the controls are used. 
Therefore, what appears on the display in the 
illustrations may differ from what appears on the 
display on the actual equipment, and some of the 
illustrations on the display may be inapplicable.

•  Do not touch the recording surface of the CD.
•  Do not stick tape etc. on the CD, or use a CD with 

tape stuck on it.

•  Do not use disc type accessories.
•  Clean from the center of the disc and move 

outward.

•  When removing CDs from this unit, pull them out 

horizontally.

•  If the CD center hole or outside rim has burrs, 

use the CD only after removing the burrs with a 
ballpoint pen etc.

•  CDs that are not round cannot be used.
•  CDs with coloring on the recording surface or CDs 

that are dirty cannot be used.

•  This unit can only play the CDs with 

.

This unit may not correctly play discs which do not 
have the mark.

•  You cannot play a CD-R or CD-RW that has not 

been finalized. (For the finalization process refer to 
your CD-R/CD-RW writing software, and your CD-R/
CD-RW recorder instruction manual.)

•  3 inch CD cannot be used. Attempt to insert using 

an adapter can cause malfunction.

B64-4640-10_01_KDCU7046_Ref_En_M.indd   3

B64-4640-10_01_KDCU7046_Ref_En_M.indd   3

10/01/08   9:32

10/01/08   9:32