Marantz SA-7S1 Manual Do Utilizador
18
ENGLISH
OPERATION
To Check the Programmed Tracks
Press the
RECALL/SCROLL
button on the remote control during
the program or when the program is stopped (“PROG” lights
up).
Every time press
up).
Every time press
RECALL/SCROLL
button, the programmed
tracks will be displayed one after the other in order.
To Delete a Programmed Track
q
Press
CANCEL
button in stop mode when program has been
made (When “PROG” indicator is lighting up).
w
Every time press
CANCEL
button, the programmed tracks
are deleted in order from the last track programmed.
Also, the deleted track’s track number indicator will
disappear.
Also, the deleted track’s track number indicator will
disappear.
To Clear Whole Program
Press
STOP
button two times while in program play. In the
stop mode, press
STOP
button once.
Program can also be cleared by pressing
OPEN/CLOSE
key
to open the disc tray.
To Add Tracks to Program
Tracks can be added to the end of program when program is
remaining (“PROG” indicator is lighting up) and in stop mode.
However tracks cannot be added to the program when the
RNDM (random) indicator is lit up.
remaining (“PROG” indicator is lighting up) and in stop mode.
However tracks cannot be added to the program when the
RNDM (random) indicator is lit up.
* Please be careful about the following matters.
•
When programming 1st through 9th tracks in a disc that
has over 10 tracks by using numeric buttons. For instance,
programming the 3rd track after programming the 1st track,
press 3 button more than approximately 1.5 seconds after
1 button is pressed. When a program is finalized, the time
is updated.
has over 10 tracks by using numeric buttons. For instance,
programming the 3rd track after programming the 1st track,
press 3 button more than approximately 1.5 seconds after
1 button is pressed. When a program is finalized, the time
is updated.
•
Likewise, when programming a track at 10th or after. For
example, to program 13th track, press 3 button within
approximately 1.5 seconds after 1 button is pressed.
example, to program 13th track, press 3 button within
approximately 1.5 seconds after 1 button is pressed.
•
When programming a track in a disc that has less than 9
tracks. For instance, to program the 5th track after 4th track
has been programmed, press 5 button more than
approximately 0.5 second after 4 button is pressed.
tracks. For instance, to program the 5th track after 4th track
has been programmed, press 5 button more than
approximately 0.5 second after 4 button is pressed.
Q&A
• How many tracks can be programmed?
Up to 30 tracks can be programmed for program play.
• Can I listen to program play repeatedly?
Press
REPEAT
button once. “
” “ALL” indicator will
light and program play will be repeated.
• Can I shuffle the programmed track order?
Press
RANDOM
button in stop mode.
SEARCHING YOUR FAVORITE TRACKS
(AMS (AUTOMATIC MUSIC SCAN) PLAY)
(AMS (AUTOMATIC MUSIC SCAN) PLAY)
This feature is convenient to search where your favorite track
is.
If the
is.
If the
AMS
button is pressed while a track is stopped, the
AMS indicator lights up, and the first ten seconds of each track
on the disc will be played starting from the first track.
Also, if the
on the disc will be played starting from the first track.
Also, if the
AMS
button is pressed during playback, the AMS
indicator lights up, and the program jumps to the next track
after approximately 10 seconds elapses on the display time.
after approximately 10 seconds elapses on the display time.
Once you find a song that you want to listen to, press the
AMS
button again or press the
PLAY
button. The AMS indicator
turns off, and normal playback resumes from the current track.
* If the
AMS
button is pressed after the tracks are programmed,
only the programmed tracks are played by AMS.
Light up
SA-7S1 U 01 eng
06.8.29, 1:52 PM
Page 18
Adobe PageMaker 6.5J/PPC