American Dj DCD-PRO450 Manual Do Utilizador
American DJ
®
AUDIO • DCD-PRO450™ INSTRUCTIONS MANUAL • PAGE 4
(1) 8 times over sampling 1 bit D/A converter
(2) Beat counter
(3) Auto cue
(4) 1/75th second frame search
(5) Realtime cue (“Cue on the Fly”)
(6) 6 different speed scan
(7) Pitch display
(8) REV/PLAY - Reverse play
(9) 30 + 30 programmable tracks
(10) Digital output RCA coaxial
(11) Fader Start , Fader Stop , (back cue) Relay playback
(using the control jack) and must use ADJ mixers (a)
(12) Large bright LCD Screen can be viewed from wide angles.
(a) FADER “Q” START: This function only operate in conjunctions with a compatible American DJ "Q" series mixer.
(b) 60 SECOND TRANSPORT PROTECTION: Will automatically close transport if left open for more than 60 seconds to
prevent someone from walking by and breaking the transport.
(c) FLIP-FLOP: On the back of the control unit there are 2 inputs that say control use a standard mini plug (stereo),
plug in from Side 1 to Side 2. Set both sides of the CD player to single mode on the control. Now when you play Disc
1 at the end of the last song the CD player will automatically change to Disc 2. Then when Disc 2 ends it will return
to Disc 1, etc.
(d) SLEEP MODE: The CD player automatically shuts off the transport and laser after 15 minutes (when in pause or cue
mode). This will lengthen the life of your motor drive and laser. To restart player, just press cue or play buttons.
(e) BOP EFFECT: A Bop Effect is a stutter, creating a sound similar to a CD skipping.
(f) Memory Backup: This will automatically keep your last setting (repeat, SGL, CTN) even if you unplug AC current. It
will also hold your cue points in memory if you accidentally open transport or shut off power. Memory cues are erased
automatically when a new CD is played, or by holding memory button down for 3 -4 seconds.
(g) “Q” Start Control: This feature is used with American DJ mixers featuring Fader “Q” Start. Connect the standard mini
plugs, supplied, from Disc 1 output on CD player to the “A” player control input on the rear of mixer. Then connect
the other supplied mini plug from Disc 2 output on CD player to the “B” player control input on the rear of mixer. By
moving the mixer fader from left to right you can start and pause Disc 1 and Disc 2 respectively. In other words,
when the cross-fader of the mixer is to the left, and you move it 20% to the right, Disc 2 will begin to play. When the
cross-fader is to the right, and you move it 20% to the left, Disc 1 will begin to play. You can create great effects similar
to scratching with this feature. After storing cue points on each side of the CD player, different songs or samples can
quickly be recalled by moving the mixer cross-fader back and forth. New cue points can be easily selected on the CD
player (1,19,20). “Q” Start control is easy to use and mastering this feature will help you create amazing effects with
your music.
(h) SKID Effects: This effect simulates the sudden platter stop of a turntable. Almost like pressing the stop button on a
turntable.
(i) Coast Effects: This effect will simulates turning the power off on a turntable - The platter spins until it slow loses
momentum.
(13) 60 seconds transport protection (b)
(14) Seamless Loop
(15) CD-R and CD-RW compatible
(16) Flip-Flop, Relay Playback (c)
(17) +/- 8%, 12%, 16% on Pitch Slider
(18) Sleep Mode after 15 min. (d)
(19) Bop Effect (e)
(20) Jog Wheel Pitch Bend +/- 16%
(21) Memory Backup, Default to last setting (f)
(22) Instant Start
(23) “Q” Start Control (g)
(24) SKID effect (h)
(25) COAST effect (i)
MAIN FEATURES
• Avoid high temperatures.
Allow for sufficient heat dispersion when installed on a rack.
• Handle the power cord carefully.
• Hold the plug when unplugging the cord.
• Keep the set free from moisture, water, and dust.
• Unplug the power cord when not using the set for long periods of time.
• Do not obstruct the ventilation holes. (For sets with ventilation holes.)
• Do not let foreign objects in the set.
• Do not let insecticides, benzene, and thinner come in contact with the set.
• Never disassemble or modify the set in any way.
GENERAL NOTES ON USE