Invacare 1900S Manual Do Utilizador
SECTION 2—OPERATING THE BATH LIFT
11
15. Lock the two rear locking casters on the lift by pressing down on the locking pedal
with your foot. Refer to FIGURE 2.1.
16. Lock the bathing unit door. Refer to the bathing unit’s owner’s manual.
Raising/Lowering the Bath Lift
NOTE: For this procedure, refer to
FIGURE 2.3.
FIGURE 2.3.
To raise the bath lift, press the up arrow
button on the hand pendant.
button on the hand pendant.
To lower the bath lift, press the down
arrow button on the hand pendant.
arrow button on the hand pendant.
FIGURE 2.3 Raising/Lowering the Bath Lift
Using the Scale (Model 1900S ONLY)
NOTE: For this procedure, refer to FIGURE 2.4.
1. With the seat empty and arms lowered, turn on the scale by touching the “on” button
on the face of the scale.
2. Press the “ZERO” button on the face of the scale.
NOTE: The digital readout shows 0.0.
3. Using the “UNITS” button, select either kilograms or pounds.
4. Transfer the resident on the seat of the lift and lower the arms.
5. Raise the resident.
NOTE: It is only necessary to raise the resident
until his/her feet are off the floor and not
touching the legs of the lift.
until his/her feet are off the floor and not
touching the legs of the lift.
6. Press the “LOCK” key
7. Read and record the weight of the resident
on the readout of the scale.
FIGURE 2.4 Using the Scale (Model 1900S
Emergency Stop
NOTE: For this procedure, refer to
FIGURE 2.5.
FIGURE 2.5.
• Press the RED emergency stop button
on the control box to stop the lift seat
and resident from raising or lowering.
and resident from raising or lowering.
• To disengage, rotate the RED
emergency stop button CLOCKWISE
until it pops out.
until it pops out.
FIGURE 2.5 Emergency Stop
RED Emergency Stop Button
Control Box
Press to Stop
Lift Seat
Rotate CLOCKWISE to
Disengage Emergency Stop