Invacare 1900S Manual Do Utilizador

SECTION 2—OPERATING THE BATH LIFT

Removing/Installing the Safety Strap

WARNING

DO NOT put the safety strap in the dryer. The high heat will melt the belt’s material.

NOTE: For this procedure, refer to FIGURE 2.10.

NOTE: The safety strap MUST be washed and disinfected after each use.

1. Unbuckle the safety strap by pulling up the hook‐and‐loop strip on the buckle.

2. Pull the hook‐and‐loop strip through the buckle (Detail “A”).

3. Remove the safety strap from the chair.

4. Repeat STEPS 1 to 3 for the other side.

5. Wrap the new safety strap around the lift frame.

6. Insert the hook‐and‐loop strip through the buckle and secure it to the chair frame

(Detail “B”).

7. Repeat STEPS 5 and 6 for the other side.

FIGURE 2.10 Removing/Installing the Safety Strap

Installing/Removing the
Shoulder Strap

NOTE: For this procedure, refer to
FIGURE 2.11.

NOTE: To remove the shoulder strap, reverse
this procedure.

1. Insert the belt through the bracket at

the top of the chair.

2. Loop the hook‐and‐loop strip through

the bracket and secure the strap.

FIGURE 2.11 Installing/Removing the

Buckle

Hook-and-Loop Strip

Chair Frame

Safety Strap

Buckle

Hook-and-Loop Strip

Chair Frame

Safety Strap

DETAIL “A”

DETAIL “B”

Shoulder

Strap

Chair

Hook-

and-Loop

Strip