Hans Grohe 14801XX1 Manual Do Utilizador
English
Technical Specification
Recommended water pressure
14.7 - 7.5 PSI
Recommended hot water temp.
10° - 140° F*
Hole size in mounting surface
1-1/”
Max. mounting surface thickness
3/8”
Max. flow rate
. GPM
*Please know and follow all applicable local codes when setting the temperature on the water heater.
Installation Considerations
For best results, Hansgrohe recommends that this unit be installed by a licensed, profes-
sional plumber.
Please read over these instructions thoroughly before beginning installation. Make sure
Please read over these instructions thoroughly before beginning installation. Make sure
that you have all tools and supplies needed to complete the installation.
The hot and cold supply hoses connect to the stops with 3/8” compression fittings
The hot and cold supply hoses connect to the stops with 3/8” compression fittings
(included).
Flush the hot and cold supplies thoroughly before installing this faucet. Debris in the
Flush the hot and cold supplies thoroughly before installing this faucet. Debris in the
water line may damage the ceramic cartridge.
•
•
•
•
HighArc Bar Faucets
06688XX0 Solaris E
06696XX0 Stratos E
06699XX0 Metro E
06857XX0 Talis S
Allegro E 14801XX1
see page 5