Kenwood KRC-X858 Manual Do Utilizador

Switch the preout between the rear and non-fading. When you
switch to non-fading, you can adjust the volume separately.
The factory default is rear preout.

"SWPRE Rear" : Rear preout
"SWPRE N-Fad" : Non-fading preout

You cannot use the high-pass filter with non-fading preout.

You can set the interval during which the open control panel
cannot reverse to be hidden. During the period you have set,
the faceplate can be removed from the faceplate bracket.

"OFF WAIT" : 0s / 3s / 5s / 10s / 15s / 20s / 25s  (s=sec.)

If you do not slide the faceplate lock switch during the period
which you have set, the unit’s power turns off after the control
panel is automatically hidden.

This function allows you to turn off the lower part of the
display if there is too much information in the display.

"BLK MASK ON" : The display will turn on by using only the

upper part of the display and the IN indicator 

"BLK MASK OFF" : The display will turn on by using the whole

part of the display.

You can turn the movement of graphic display on and off.
The initial setting is ON.

"Graphic ON" : The graphic display works.
"Graphic OFF" : The graphic display does not work.

You can dim the display. 

The dimmer function is not available for units if the dimmer wire
is not connected.

"Dimmer ON" : The dimmer setting is on.
"Dimmer OFF" : The dimmer setting is off.

This adjustment permits easy viewing of the display.

"Contrast 0" – "Contrast 10"

The initial setting value is "5" .

You can switch the color of the button illumination between
green and red.

"Color Green" : The color of the illumination is green.
"Color Red" : The color of the illumination is red.

— 35 —

KRC-X858_U.S-4  00.12.27 0:13 PM  Page 35