Yamaha RX-V3800 Manual Do Utilizador

■

Use this feature to designate the default audio input jack 
select setting (see page 81) for the input sources connected 
to the DIGITAL INPUT jacks when you turn on the power 
of this unit.

■

Use this feature to designate the default decoder mode 
(see page 82) for the input sources when you turn on the 
power of this unit.

■

Use this feature to designate the extended decoder mode 
(see page 88) for the input sources connected to the 
DIGITAL INPUT jacks when you turn on the power of 
this unit.

■

Use this feature to prevent accidental changes to sound 
field program parameter values and other system settings.

y
When you select the protected parameter, “

” appears at the 

bottom left of the GUI screen. You can adjust the parameters 
when you select the parameter and “

” does not appear at the 

bottom left of the GUI screen even if “Memory Guard” is set to 
“On”.

■

Use this feature to adjust the HDMI support audio.

Use this feature to select whether to play back HDMI 
audio signals on this unit or on another HDMI component 
connected to the HDMI OUT jack on the rear panel of this 
unit.

• This unit transmits audio and video signals input at the HDMI 

input jacks to HDMI OUT jack only when this unit is turned on 
even if “Support Audio” is set to “Other”.

• Available audio/video signals depend on the specification of the 

connected video monitor. Refer to the instruction manual of 
each connected component.

You can display the format, sampling frequency, channel, 
bit rate and flag data of the current input signal.
You can display the format, sampling frequency, channel, 
bit rate and flag data of the current input signal.

D

AMP

G

SET MENU

4k

n

The audio information of the current input source 
appears in the GUI screen.

4l

h

y
The information is also appears in the front panel display. 
Press 4l / h repeatedly to change the displayed 
information.

Automatically detects the type of audio input 
signals and selects the appropriate audio input 
jack select setting.

Last

Automatically selects the last audio input jack 
select setting used for the connected input 
source.

Automatically detects the type of input signals 
and select the appropriate decoder mode setting.

Last

Automatically selects the last decoder mode 
setting used for the connected input source.

Automatically detects the input digital audio 
signals and activates the appropriate decoder.

Last

Automatically selects the last decoder mode 
selected “EXTD Surround” in “Sound”.

Turns off the “Memory Guard” feature.

On

Protects the following parameters

– sound field program parameters
– all GUI menu parameters
– all speaker levels

Plays back HDMI audio signals on this unit. The 
HDMI audio signals input at the HDMI input 
jacks of this unit are not output to the HDMI 
component connected to the HDMI OUT jack 
on the rear panel of this unit.

Other

Plays back HDMI audio signals on another 
HDMI component connected to the HDMI OUT 
jack.