Yamaha RX-V3800 Manual Do Utilizador

This unit has four HDMI input jacks and one HDMI 
output jack for digital audio and video signal input/output. 
Connect the HDMI IN1, HDMI IN2, HDMI IN3, or 
HDMI IN4 jack of this unit to the HDMI output jack of 
other HDMI components (such as a DVD player). Connect 
the HDMI OUT jack of this unit to the HDMI input jack 
of other HDMI components (such as a TV and a 
projector).
The video or audio signals input at the HDMI IN jacks of 
the selected input source are output at the HDMI OUT 
jack of this unit.

y
• You can check the potential problem about the HDMI 

connection (see page 98).

• See page 145 for the information on the input signal capability 

of this unit for the HDMI connection.

■

y
• We recommend that you use a commercially available HDMI 

cable shorter than 5 meters (16 feet) with the HDMI logo 
printed on it.

• Use a conversion cable (HDMI jack 

↔

 DVI-D jack) to connect 

this unit to other DVI components.

• Do not disconnect or connect the cable or turn off the power of 

the HDMI components connected to the HDMI OUT jack of 
this unit while data is being transferred. Doing so may disrupt 
playback or cause noise.

• The HDMI OUT jack outputs the audio signals input at the 

HDMI input jacks only even if “Support Audio” is set to 
“Other” (see page 98).

• If you turn off the power of the video monitor connected to the 

HDMI OUT jack via a DVI connection, this unit may fail to 
establish the connection to the component.

• The analog video signals input at the composite video, S-video 

and component video jacks can be digitally up-converted to be 
output at the HDMI OUT jack. Set “Conversion” to “On” in 
“Manual Setup” (see page 89) to activate this feature.

■

IN1

BD/HD DVD

IN2

DVD

IN3

DTV/CBL

IN4

DVR