Yamaha RX-V3800 Manual Do Utilizador

■

Virtual CINEMA DSP allows you to enjoy the CINEMA 
DSP or HiFi DSP sound field programs without surround 
speakers. It creates virtual speakers to reproduce the 
natural sound field.
When you set “Surround” to “None” (see page 92), Virtual 
CINEMA DSP activates automatically whenever you 
select a CINEMA DSP or HiFi DSP sound field program 
(see page 45).

Virtual CINEMA DSP will not activate even when “Surround” is 
set to “None” (see page 92) in the following cases:

– when the component connected to the MULTI CH INPUT 

jacks is selected as the input source (see page 42).

– when headphones are connected to the PHONES jack.
– when this unit is in the “7ch stereo” mode.

■

SILENT CINEMA allows you to enjoy multi-channel 
music or movie sound through ordinary headphones. 
SILENT CINEMA activates automatically whenever you 
connect headphones to the PHONES jack while listening 
to CINEMA DSP or HiFi DSP sound field programs (see 
page 45). When activated, the SILENT CINEMA 
indicator lights up in the front panel display.

• SILENT CINEMA does not activate when the component 

connected to the MULTI CH INPUT jacks is selected as the 
input source (see page 42).

• SILENT CINEMA is not effective when the Pure Direct (see 

page 51) or “2ch Stereo” mode (see page 52) is selected, or 
when this unit is in the “STRAIGHT” mode.

CINEMA DSP 3D mode creates the intensive and 
accurate stereoscopic sound field in the listening room. 
You can activate and deactivate the CINEMA DSP 3D 
mode.

K

3D DSP

• “3D:ON” appears in the front panel display and the 3D 

indicator (see page 36) lights up while this unit is in the 
CINEMA DSP 3D mode. CINEMA DSP 3D mode 
creates the intensive and stereoscopic sound field in the 
listening room.

• “3D:OFF” appears in the front panel display and the 

3D indicator disappears when the CINEMA DSP 3D 
mode is turned off. Conventional CINEMA DSP mode 
creates the large and expanding sound field in the 
listening room.

• “3D:––” appears when the CINEMA DSP 3D mode is not 

available.

• If you set “Presence” to “None”, this unit cannot activate the 

CINEMA DSP 3D mode.

• This unit activates the CINEMA DSP 3D mode only when you 

select one of the CINEMA DSP or HiFi DSP sound field 
programs.

• When your headphones are connected to this unit, this unit 

cannot activate the CINEMA DSP 3D mode.

When this unit is in the “STRAIGHT” mode, 2-channel 
stereo sources are output from only the front left and right 
speakers. Multi-channel sources are decoded straight into 
the appropriate channels without any additional effect 
processing.

y
You can also select the “STRAIGHT” mode by using GUI screen. 
See page 74 for details.

P

STRAIGHT

I

STRAIGHT

y
The names of the audio signal format of the input source and the 
active decoder appear in the front panel display.

■

P

STRAIGHT

I

STRAIGHT

The sound effect is turned back on.

y
You can also select desired sound field program by rotating the 
O

 selector (or press one of the desired sound field 

program buttons (O)) repeatedly.

Before performing the following operation, set the operation 
mode selector on the remote control to D

.

STRAIGHT