Yamaha R-S700BL Manual Do Utilizador

When using multiple Yamaha receivers or amplifiers with 
the same default code setting, you may unintentionally 
operate those components simultaneously. In this case, set 
one of the alternative codes for this unit to operate this 
unit separately.

• Switching to ID1

Press and hold the ID button and the numeric button 
“1” on the remote control together for about 3 seconds.

• Switching to ID2

Press and hold the ID button and the numeric button 
“2” on the remote control together for about 3 seconds.

*

When you change the remote control ID, you must 
change the remote control ID of this unit (see page 43).

If the remote control batteries are weak or removed, the remote 
control ID will switch to the default setting (ID2). In this case, 
replace the batteries and set the remote control ID again.

Remote control ID*

ID1

To operate this unit using 

an alternative code.

ID2

(default setting)

To operate this unit using 

the default code.