Yamaha RX-V757 Manual Do Utilizador

A

Outputs audio signals for private listening with 
headphones. When you connect headphones, no signals 
are output to the PRE OUT jacks or to the speakers.
All Dolby Digital and DTS audio signals are mixed down 
to the left and right headphone channels.

B

Turns on or off the set of front speakers connected to the A 
and/or B terminals on the rear panel each time the 
corresponding button is pressed.

C

*

Switches the function of PRESET/TUNING/CH l / h 
(LEVEL) between selecting preset station numbers and 
tuning.

D

Switches the sound fields off or on. When STRAIGHT is 
selected, input signals (2-channel or multi-channel) are 
output directly from their respective speakers without 
effect processing.

E

*

Switches the reception band when the unit is in tuner 
mode.

F

Use to select sound field programs or adjust the bass/treble 
balance (in conjunction with TONE CONTROL).

G

Use to adjust the bass/treble balance for the front left and 
right, center, presence and subwoofer channels (see 
page 31).

H

Sets the priority (AUTO, DTS, ANALOG) for the type of 
signals received when one component is connected to two 
or more of this unit’s input jacks (see page 37).

I

Selects the input source you want to listen to or watch.

J

Selects the source connected to the MULTI CH INPUT 
jacks. When selected, the MULTI CH INPUT source takes 
priority over the source selected with INPUT (or the input 
selector buttons on the remote control).

K

Turns on or off PURE DIRECT mode (see page 35).

■

L

Switches this unit’s operation to control the component in 
the main room (see page 84).

Switches this unit’s operation to control the component in 
the second room (Zone 2) (see page 84).

*

Available only when the unit is in the XM Satellite Radio 
mode (see page 45).