Yamaha X-V2600 Manual Do Utilizador

Zone2 Amplifier (Zone 2 amplifier)
Use to select how the Zone 2 speakers are amplified.
Choices: EXT, INT:Sur., INT:PRNS, INT:BOTH

• Select “EXT” if you want to connect your Zone 2 

speakers through an external amplifier connected to the 
ZONE 2 OUTPUT jacks on the rear panel of this unit.

• Select “INT:Sur.” to use the internal surround amplifier 

of this unit if you want to connect your Zone 2 speakers 
directly to the PRESENCE/ZONE 2(3) speaker 
terminals on the rear panel of this unit.

• Select “INT:PRNS” to use the internal surround back 

amplifier of this unit if you want to connect your Zone 
2 speakers directly to the PRESENCE/ZONE 2(3) 
speaker terminals on the rear panel of this unit.

• Select “INT:Both” to use the internal surround and 

surround back amplifiers of this unit if you want to 
connect you Zone 2 speakers directly to both the 
PRESENCE/ZONE 2(3) and the SURROUND/ZONE 
2(3) speaker terminals on the rear panel of this unit.

• If BI-AMP is set to ON in the ADVANCED SETUP menu, 

INT:PRNS and INT:Both cannot be selected.

• Zone 2 and Zone 3 cannot use the same amplifier at the same 

time. If INT:Both is selected for Zone2 Amplifier, for instance, 
only EXT can be selected for Zone3 Amplifier and vice versa.

• The Intelligent Power AMP Assign feature of this unit becomes 

in effect in the following cases so that the surround and 
surround back amplifiers of this unit are automatically assigned 
to the main room for the use of the surround back speakers 
connected to the SURROUND BACK speaker terminals in the 
7.1-channel system.
– When Zone2 Amplifier and Zone3 Amplifier are set to 

INT:PRNS and EXT respectively and Zone 2 is turned off

– When Zone2 Amplifier and Zone3 Amplifier are set to EXT 

and INT:PRNS respectively and Zone 3 is turned off

• If either Zone2 Amplifier or Zone3 Amplifier is set to INT:Sur. 

or INT:PRNS, the speaker system of the main room is limited to 
3.1 or 2.1-channel playback no matter when Zone 2 or Zone 3 is 
turned off because the SURROUND/ZONE 2(3) speaker 
terminals are used for the zone connection.

Zone3 Amplifier (Zone 3 amplifier)
Use to select how the Zone 3 speakers are amplified.
Choices: EXT, INT:Sur., INT:PRNS, INT:BOTH

• Select “EXT” if you want to connect your Zone 3 

speakers through an external amplifier connected to the 
ZONE 2 OUTPUT jacks on the rear panel of this unit.

• Select “INT:Sur.” to use the internal surround amplifier 

of this unit if you want to connect your Zone 3 speakers 
directly to the PRESENCE/ZONE 2(3) speaker 
terminals on the rear panel of this unit.

• Select “INT:PRNS” to use the internal surround back 

amplifier of this unit if you want to connect your Zone 
3 speakers directly to the PRESENCE/ZONE 2(3) 
speaker terminals on the rear panel of this unit.

• Select “INT:Both” to use the internal surround and 

surround back amplifiers of this unit if you want to 
connect you Zone 3 speakers directly to both the 
PRESENCE/ZONE 2(3) and the SURROUND/ZONE 
2(3) speaker terminals on the rear panel of this unit.

• If BI-AMP is set to ON in the ADVANCED SETUP menu, 

INT:PRNS and INT:Both cannot be selected.

• Zone 2 and Zone 3 cannot use the same amplifier at the same 

time. If INT:Both is selected for Zone2 Amplifier, for instance, 
only EXT can be selected for Zone3 Amplifier and vice versa.

• The Intelligent Power AMP Assign feature of this unit becomes 

in effect in the following cases so that the surround and 
surround back amplifiers of this unit are automatically assigned 
to the main room for the use of the surround back speakers 
connected to the SURROUND BACK speaker terminals in the 
7.1-channel system.
– When Zone2 Amplifier and Zone3 Amplifier are set to 

INT:PRNS and EXT respectively and Zone 2 is turned off

– When Zone2 Amplifier and Zone3 Amplifier are set to EXT 

and INT:PRNS respectively and Zone 3 is turned off

• If either Zone2 Amplifier or Zone3 Amplifier is set to INT:Sur. 

or INT:PRNS, the speaker system of the main room is limited to 
3.1 or 2.1-channel playback no matter when Zone 2 or Zone 3 is 
turned off because the SURROUND/ZONE 2(3) speaker 
terminals are used for the zone connection.