Yamaha RXV3000 Manual Do Utilizador

52

■

Set 

 to 

.

Press a Macro button.

• When you are finished using the Macro feature, set 

 to 

.

• While the main unit is carrying out a macro program, the main

unit does not receive any other button’s function until the
macro is complete (the 

 indicator stops flashing).

• Continue to aim the remote control at the component the macro

is operating until the macro program is complete.

■

You can use the Macro feature to transmit many remote control commands by pressing a single button.

Press 

 using a ball point pen or similar object.

• If you do not initiate the procedure within 30 seconds, the

macro programming process is canceled.

Press the macro button on which you want to program the
Macro.

• If you want to change the source component, use

 h/g or input buttons. When you use

input buttons, input is selected as a Macro step, whereas

 h/g only changes the component.

• The display window shows the button you chose for

programming the macro and the component name in
alternation.

Press the buttons of the functions that you want to include in
the macro sequence in order.

• You can set up to 10 Macro steps (10 functions).

(ex)

MCR 1 : DVD input

MCR 2 : DVD y

MCR 3 : DVD w

Press 

 again when the sequence you want to

program is complete.

• After you set 10 steps, “FULL” is displayed.

• “NG” appears in the display window when programming is not done correctly.

• “ERROR” appears in the display window in the following conditions: when pressing more than one button at once; and when 

 is

switched to another position.

MACRO ON/OFF

Macro buttons

MACRO

Flashes
alternately

Flashes
alternately

indicates the number
of macrosteps you
entered

MACRO