Yamaha AVENTAGE RX-A2020 Manual Do Utilizador

CONFIGURATIONS

➤ Configuring various functions (Setup menu)

En

■

Configures the output characteristics of the speakers.

• When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm 

(6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”).

❑ Front

Selects the size of the front speakers.

• “Front” is automatically set to “Large” when both “Subwoofer 1” and “Subwoofer 2” are set to “None”.

❑ Center

Selects whether or not a center speaker is connected and its size.

❑ Surround

Selects whether or not surround speakers are connected and their sizes.

❑ Surround Back

Selects whether or not surround back speakers are connected and their sizes.

• This setting is not available when “Surround” is set to “None”.

7ch BI-AMP +FP

(RX-A3020 only)
Select this when you use 7-channel speakers (including bi-amp front 
speakers) plus front presence channel expansion using an external 
amplifier (p.26).

7ch BI-AMP +FP+RP

(RX-A3020 only)
Select this when you use 7-channel speakers (including bi-amp front 
speakers), plus front presence and rear presence channel expansion 
using an external amplifier (p.27).

Large

Select this option for large speakers.
The front speakers will produce all of the front channel frequency 
components.

Small (default)

Select this option for small speakers.
The subwoofer will produce front channel low-frequency components 
lower than the specified crossover frequency (default: 80 Hz).

Large

Select this option for large speakers.
The center speaker will produce all of the center channel frequency 
components.

Small (default)

Select this option for small speakers.
The subwoofer or front speakers will produce center channel 
low-frequency components lower than the specified crossover 
frequency (default: 80 Hz).

None

Select this option when no center speaker is connected.
The front speakers will produce center channel audio.

Large

Select this option for large speakers.
The surround speakers will produce all of the surround channel 
frequency components.

Small (default)

Select this option for small speakers.
The subwoofer or front speakers will produce surround channel 
low-frequency components lower than the specified crossover 
frequency (default: 80 Hz).

None

Select this option when no surround speakers are connected.
The front speakers will produce surround channel audio. Virtual 
CINEMA DSP works when you select a sound program.

Large x1

Select this option when one large speaker is connected.
The surround back speaker will produce all of the surround back 
channel frequency components.

Large x2

Select this option when two large speakers are connected.
The surround back speakers will produce all of the surround back 
channel frequency components.

Small x1

Select this option when one small speaker is connected.
The subwoofer or front speakers will produce surround back channel 
low-frequency components lower than the specified crossover 
frequency (default: 80 Hz).

Small x2 (default)

Select this option when two small speakers are connected.
The subwoofer or front speakers will produce surround back channel 
low-frequency components lower than the specified crossover 
frequency (default: 80 Hz).

None

Select this option when no surround back speakers are connected.
The surround speakers will produce surround back channel audio.