Yamaha HTR-6080 Guia Do Utilizador

HDMI ASP

Use this feature to adjust the aspect ratio for video signals 
output at the HDMI OUT jack.

Choices: THROUGH, 16:9 NORMAL, SMART ZOOM

• Select “THROUGH” if you do not make any 

adjustments to the aspect ratio for HDMI video signal 
sources.

• Select “16:9 NORMAL” to display video images with 

4:3 of aspect ratio on your video monitor with 16:9 of 
aspect ratio. Black stripes appear on the right and left 
sides as a result.

• Select “SMART ZOOM” to fit video images with 4:3 

of aspect ratio to your video monitor with 16:9 of 
aspect ratio.

• When “HDMI UP-SCALING” is set to “THRGH” (see 

page 81), you cannot make any adjustments to “HDMI ASP”.

• When “HDMI ASP” is set to “SMART ZOOM”, the video 

images of the edge of the video monitor are rather stretched.

• When the video signals are input at HDMI IN jacks or the 

signals are input with 720p or 1080i of resolution, the setting of 
“HDMI ASP” does not affect the video signals output at the 
HDMI OUT jack.

DIMMER

Use this feature to adjust the brightness of the front panel 
display.
Control range: –

 

4 to 0

Control step: 1
• Press Dl to make the front panel display dimmer.
• Press Dh to make the front panel display brighter.

OSD SHIFT

Use this feature to adjust the vertical position of the OSD.
Control range: –5 (upward) to +5 (downward)
Control step: 1
Initial setting: 0
• Press Dl to raise the position of the OSD.
• Press Dh to lower the position of the OSD.

Source feature OSD display time   
OSD-SOURCE
Use this feature to set the amount of time to display the 
XM Satellite Radio information or iPod menu in the OSD 
after you perform a certain operation.
Choices: ON, 10s, 30s
• Select “ON” to display the OSD continuously during 

an operation.

• Select “10s” to turn off the OSD 10 seconds after you 

perform a certain operation.

• Select “30s” to turn off the OSD 30 seconds after you 

perform a certain operation.

OSD-AMP

Use this feature to set the amount of time to display the 
status and sound field parameters information screen after 
you perform a certain operation.
Choices: ON, 10s, 30s
• Select “ON” to display the OSD constantly during an 

operation.

• Select “10s” to turn off the OSD 10 seconds after you 

perform a certain operation.

• Select “30s” to turn off the OSD 30 seconds after you 

perform a certain operation.

FL SCROLL

Use this feature to set whether to display the information 
(such as a song title or a channel name) in the front panel 
display in a continuous manner or by the first 14 
alphanumeric characters after scrolling all characters once 
when “XM” or “DOCK” is selected as the input source.
Choices: CONT, ONCE
• Select “CONT” to display the operation status in the 

front panel display in a continuous manner.

• Select “ONCE” to display the operation status in the 

front panel display by the first 14 alphanumeric 
characters after scrolling all characters once.

OPTION MENU

A)DISPLAY SET

1/2

VIDEO-CONV.

;;;ON

HDMI UP-SCALING

*THRGH

*480p

>*1080i

*720p

. HDMI ASP;;;;;;THROUGH

[ ]/[ ]:Select

[

[

[ ]/[ ]:Up/Down

p

p