Kenwood KRF-V9300D Manual Do Utilizador

Página de 72
58
   
KRF-V9300D/KRF-V8300D/KRF-V7300D
List
e
n
ing t
o
 radio broadcast
s
Receiving preset stations
TUNER
1
  Press [TUNER] to select tuner as the source.
2
  Enter the number of the preset station you want to 
receive (up to "40" preset numbers).
Press the Numeric keys in the following order:
For preset No.15: [+10] and [5]
For preset No.20: [+10], [+10] and [0]
 
Preset number
•  If you make a mistake entering a two digit number, press [+10] 
repeatedly to return to the original display and start again.
Receiving preset stations in 
order (P.CALL)
 
P.CALL
/D
TUNER
MULTI CONTROL
/
1
  Press [TUNER] to select tuner as the source.
2
 Use [P.CALL 
4/¢] to select the desired station.
Each time you press the key, another preset station is 
received in order.
Holding down the [P.CALL 
4/¢] lets you skip through 
the presets, receiving each preset station at 0.5 second 
intervals.
• [MULTI 
CONTROL 
2/3] can also be used to select the preset 
station.
Tuning by program type 
(PTY search)
This function lets you set the tuner to automatically search for 
stations which are currently broadcasting the type of program 
(genre) you want to listen to.
Under certain receiving conditions, it may take more than 1 
minute to complete the search.
KRF-V9300D
KRF-V8300D
PTY
KRF-V7300D
PTY
P.CALL
/D
MULTI CONTROL
/
ENTER
Preparations
•  Execute the RDS auto memory procedure.
•  Set the broadcast band to FM.
•  Tune to an RDS station.
1
  Press [PTY] to activate the PTY search mode.
 
When an RDS broadcast is received, the program type is 
shown on the display. If no PTY data is available, or if the 
station is not an RDS station, "None" is displayed.
Numeric keys
Continued 
B60-5740-00_00_EN.indd   58
B60-5740-00_00_EN.indd   58
08.7.17   3:30:26 PM
08.7.17   3:30:26 PM