Kenwood KRF-V7771D Manual Do Utilizador
16
KRF-V7771D (En/T)
Setup
1 Open the cover and remove batteries.
2 Press the reset button with the tip of a thin object for a few
2 Press the reset button with the tip of a thin object for a few
seconds.
÷ This operation clears all of the previously set-up data.
Preparations
÷ Press the POWER key and ON/STANDBY key of the receiver to
turn it ON.
1
1 Remove the cover.
÷ Insert four AA-size (R6/UM-3) batteries as indi-
cated by the polarity marking.
÷ To maintain the memory of the settings you
made before, complete the battery replacement
operation within 30 seconds.
operation within 30 seconds.
3
2
Perform the following procedure after inserting batteries for
the first time or when the remote control back-up data has
been lost.
the first time or when the remote control back-up data has
been lost.
4
To reset the remote control
Loading batteries
Setting up the remote control according to your receiver
The “Model Type Setup” screen
appears.
appears.
2 Insert batteries.
3 Close the cover.
÷ After selecting an icon, always be sure to press the ENTER key to
enter the selection.
Model Type Setup
Check the display.
Move the cursor to “ Model 2 “.
Enter the selection.
Press the ENTER key.
Setup of the remote control unit
÷ If the remote control backup data is kept stored
when the batteries are replaced, the “Model
Type Setup” menu screen is not displayed. In
this case, operations in
Type Setup” menu screen is not displayed. In
this case, operations in
2, 3, 4 are not neces-
sary.
Low battery alarm
When the alarm message
appears to indicate that the
remaining power is low, re-
place all the batteries with
new ones.
appears to indicate that the
remaining power is low, re-
place all the batteries with
new ones.
3
1
2
2
1
Low
Battery
Model Type Setup
Model 2
Model 1
ENTER
÷ It can be moved in 4 directions, depending on
how you select the icon.
Move the cursor.
Model Type Setup
Model 2
Model 1
ENTER