Kenwood KRC-279RG Manual Do Utilizador

set the time manually if the automatic time adjustment function
is turned off. The factory default is automatic time adjustment.

"SYNC ON" : Automatic time adjustment
"SYNC OFF" : Manual time adjustment

Tune into an RDS station for 3 or 4 minutes.
The time adjusts automatically to the correct local time.

The time is not adjusted when the RDS station you are tuned to is
not transmitting a time signal. Choose another RDS station in
such a case.

With automatic time adjustment, you can set the clock time
automatically according to time data sent from RDS stations
(after receiving RDS signals for several minutes). You can also

Adjust the time manually.

This adjustment is available only when the automatic time
adjustment is set to off.

Select the display "CLK ADJ" during the selecting function in
the menu system.

Hold down either the 

4 or ¢ button for two seconds or

more to enter the Manual time adjustment mode.
The time display will blink.

• Adjusting the hours

Press the FM button to advance the hours, or press the AM
button to make the hours go back.

• Adjusting the minutes

Press the 

¢ button to advance the minutes, or press the

4 button to make the minutes go back.

This function produces a beep sound that accompanies button
operation. It can be switched on or off.

"BEEP ON" : Beep setting is on.
"BEEP OFF" : Beep setting is off.

The beep sound is not output from the preout jacks.

— 21 —

Set the time for the OFF Timer function activated when you
selected Standby mode.
If the predefined time elapses, this unit's power is
automatically turned off.

"OFF ___" :Power OFF Timer function is canceled.
"OFF 20M" :Unit's power goes OFF after 20 minutes.
"OFF 40M" :Unit's power goes OFF after 40 minutes.
"OFF 60M" :Unit's power goes OFF after 60 minutes.

The factory default is "OFF 20M" .