Kenwood KRF-V5200D Manual Do Utilizador

English   

œ Strip coating.

 

∑ Push the lever.

 

é Insert the cord.

 

® Return the lever.

 

Notes:
•  Never short circuit the + and – speaker cords.
•  If the left and right speakers are connected inversely or the 

speaker cords are connected with reversed polarity, the sound 
will be unnatural with ambiguous acoustic imaging. Be sure to 
connect the speakers correctly.

The broadcast reception cannot be made unless the antennas are 
connected. Connect the antennas correctly as instructed below.

Place the supplied loop antenna as far as possible from the 
receiver, TV set, speaker cords and power cord. Adjust the 
direction for best reception.

œ Attach to the stand.

 

∑ Push the lever.

 

é Insert the antenna cord.

 

® Release the lever.

 

† Place the antenna and adjust the direction.

The supplied indoor antenna is for temporary use only. For stable 
signal reception we recommend using an outdoor antenna. 
Disconnect the indoor antenna when you connect one outdoors.

œ Insert the antenna cord.

 

∑ Fix the antenna on the wall.

Lead the 75Ω coaxial cable connected to the FM outdoor antenna 
into the room and connect it to the FM 75Ω terminal. 

GND

AM

FM 75

7

Attach to 
the stand

AM loop antenna

Use an antenna 
adapter 
(commercially 
available)

FM indoor antenna

FM outdoor antenna
(commercially available)

B60-5676-00_00.indd   15

B60-5676-00_00.indd   15

07.4.12   9:57:14 AM

07.4.12   9:57:14 AM