Kenwood KRF-V5200D Manual Do Utilizador

English

This function automatically stores up to 40 RDS stations in the 
preset memory. In order to use the PTY function, the RDS stations 
must be stored in the preset memory using the RDS AUTO 
MEMORY function.

œ Use [TUNER] to select the tuner.

∑ Use [BAND] to set the broadcast band to "FM".

é Press [AUTO MEMORY].

•  After a few minutes, up to 40 RDS stations are preset in order from 

channel "01".

•  Stations already stored in the preset memory may be replaced by 

RDS stations. (i.e., If the RDS AUTO MEMORY function detects 15 
RDS stations, the stations currently preset at numbers 01–15 will 
be replaced by the RDS stations.)

The RDS auto memory function assigns preset numbers to RDS 
stations starting from preset number "1". Therefore, be sure 
to execute the RDS auto memory function before using the 
following operations to manually store AM stations and other FM 
stations, and RDS stations. 
See <RDS Auto Memory>.

 

MULTI CONTROL 
/O

œ Tune to the station you want to store.

∑ Press [MEMORY] while receiving the station.

Proceed to step 

é within 20 seconds.

(If more than 20 seconds elapse, press [MEMORY] again.)

é Use [MULTI CONTROL 5/∞] to select one of the 

® Press [MEMORY] again to confirm the setting.

• Repeat 

steps 

œ, ∑, é, and ® to store as many stations as 

necessary.

•  If you store a station at a previously used preset, the previous 

station will be replaced by the new one.

B60-5676-00_00.indd   28

B60-5676-00_00.indd   28

07.4.12   9:57:33 AM

07.4.12   9:57:33 AM