Kenwood KRF-V5200D Manual Do Utilizador

English

You can make further adjustments to the sound while listening to 
playback in the surround mode.

MULTI CONTROL 
/O

œ Press [SOUND] until the desired item appears on 

Each time you press the key, the menu changes as 
follows. Note that some items are not displayed 
depending on speaker settings and listen mode.

"C"

Center speaker level *

1

-10 – +10dB

"RS"

Surround right speaker level *

1

-10 – +10dB

"LS"

Surround left speaker level *

1

-10 – +10dB

"SW"

Subwoofer level *

1

-10 – +10dB

"INPUT"

Input level *

2

-6, -3, 0

"NIGHT"

Midnight mode *

3

"ON", "OFF"

"PANORAMA"

Panorama mode *

4

"ON", "OFF"

"DIMENSION"

Dimension *

4

"CENTER WIDTH"

Center width *

4

Input source name Exit the adjustment mode.

*

1

  The adjustment is only temporary for the current input selection. 

The value will return automatically to the original setup value 
when the power is turned on/off or when the input selection is 
changed.

*

2

  Analog mode only

*

3

  Dolby Digital and DTS mode only

*

4

  Pro Logic II Music mode only.

∑ Use the [MULTI CONTROL 5/∞] to adjust the 

The output level from the desired speaker channels can be fine 
adjusted according to the properties of each disc.
The adjustment is only temporary for the current input selection. 
The value will return automatically to the original setup value 
when the power is turned on/off or when the input selection is 
changed.

œ Press [SOUND] repeatedly until the speaker to be 

∑ Use the [MULTI CONTROL 5/∞] to adjust the level.

If the input level of an analog source signal is too high, the CLIP 
indicator will blink to indicate. Adjust the input level.

 

œ Press [SOUND] repeatedly until "INPUT" appears 

∑ Use the [MULTI CONTROL 5/∞] to adjust the level.

When watching movies at night, you might not be able to raise 
the volume as loud as normal. Midnight mode compresses the 
dynamic range of previously specified heavy sound passage of 
the Dolby Digital and DTS mode sound track (like scenes with 
sudden increases in volume) to minimize the difference in volume 
between the scenes with heavy sound passage and scenes with 
normal sound passage. This makes it easy to hear all of the sound 
track, even when listening at low volumes.

œ Press [SOUND] repeatedly until "NIGHT" appears 

This can be selected only if "CD/DVD", "DVD/6CH" or 
"VIDEO2" is selected as the source and the listen mode 
is set to "DOLBY DIGITAL" or "DTS".

∑ Use [MULTI CONTROL 5/∞] to select the "ON" or 

•  Some Dolby Digital or DTS software may not be compatible with 

the Midnight mode.

B60-5676-00_00.indd   32

B60-5676-00_00.indd   32

07.4.12   9:57:42 AM

07.4.12   9:57:42 AM