Kenwood KRF-X9050D Manual Do Utilizador

• Subwoofer is OFF.

• The remote control is set to a different operation

mode.

• Batteries are exhausted.
• The remote control unit is too far away from the

main system, controlling angle is too large, or
there is an obstacle between the receiver and
the remote.

• The audio cords and system control cords are

not connected properly.

• No software is loaded in the source component.

• An attempt is made to play a tape which is being

recorded in the cassette deck.

• The remote control has not been set to the

operation mode for the component you wish to
control.

• The microprocessor of the remote control mal-

functions.

• Turn the subwoofer ON.

¡

• Press the source keys or 

 

 keys

to select the appropriate operation mode.

• Replace with new batteries.

)

• Operate the remote control unit within the

controllable range.

• Connect properly referring to “Setting up the

system”.

8

• Place software in the source component you

want to play.

• Wait until recording has completed.

• Press the source select keys or 

 

keys to activate the operation mode for the
component you want to control before
operation

fi

• Reset the microprocessor.

o