ONKYO TX-SR804E Manual Do Utilizador

61

Using the Listening Modes—Continued

The following table shows which listening modes can be used with each input signal format.

 : Only available on 6.1/7.1-channel playback systems. Not available while the ZONE 2 SPEAKERS terminals are 

being used.

 : Only available on 7.1-channel playback systems. Not available while the ZONE 2 SPEAKERS terminals are 

being used.

*1. In the Pure Audio and Direct listening modes, 32 kHz, 44.1 kHz, and 48 kHz PCM is processed at 64 kHz, 88.2 kHz, and 96 kHz respectively. In 

listening modes other than Pure Audio, Direct, and Stereo, 96 kHz PCM is processed at 48 kHz.

*2. In listening modes other than Pure Audio, Direct, Stereo, and DTS 96/24, DTS 96/24 sources are processed as normal DTS.

*3. The Multich listening mode cannot be used with 176.4/192 kHz PCM sources connected to an HDMI IN.

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

*4. If the Surr Back parameter is set to None, or the ZONE 2 SPEAKERS terminals are being used, normal Pro Logic II is used.
*5. Available only when surround speakers are connected.

✔

✔

✔

✔

✔

✔

✔

✔

✔

*6

*6. If the Surr Back setting is set to None, or the ZONE 2 SPEAKERS terminals are being used, normal DTS is used.

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

Tip: To check the format of the digital input signal, see “Displaying Source Information” on page 59.