ONKYO TX-SR804E Manual Do Utilizador
95
Specification
Amplifier Section
Video Section
Tuner Section
■ FM
■ AM
General
■ Video Inputs
■ Video Outputs
■ Audio Inputs
■ Audio Outputs
Specifications and features are subject to change without
notice.
notice.
Rated Power Output
North American:
105 watts minimum continuous power per channel, 8 ohm
loads, 2 channels driven from 20 Hz to 20 kHz, with a
maximum total harmonic distortion of 0.08% (FTC)
135 watts minimum continuous power per channel, 6 ohm
loads, 2 channels driven at 1 kHz, with a maximum total
harmonic distortion of 0.1% (FTC)
loads, 2 channels driven from 20 Hz to 20 kHz, with a
maximum total harmonic distortion of 0.08% (FTC)
135 watts minimum continuous power per channel, 6 ohm
loads, 2 channels driven at 1 kHz, with a maximum total
harmonic distortion of 0.1% (FTC)
European:
7 ch
×
170 W at 6 ohms, 1 kHz, 1 ch driven (IEC)
Others (Maximum Output Power):
7 ch
×
200 W at 6 ohms, 1 kHz, 1 ch driven (JEITA)
Dynamic Power
240 W + 240 W (3
Ω, Front)
180 W + 180 W (4
Ω, Front)
125 W + 125 W (8
Ω, Front)
THD (Total Harmonic
Distortion)
Distortion)
0.08% (Power Rated)
Damping Factor
60 (Front, 1 kHz, 8
Ω)
Input Sensitivity and
Impedance
Impedance
200 mV/ 47 k
Ω (LINE)
2.5 mV/47 k
Ω (PHONO MM)
Output Level and
Impedance
Impedance
200 mV/ 470
Ω (REC OUT)
Phono Overload
70 mV (MM 1 kHz, 0.5%)
Frequency Response
5 Hz–100 kHz/ +1 dB–3 dB (Direct mode)
Tone Control
±10 dB, 50 Hz (BASS)
±10 dB, 20 kHz (TREBLE)
±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio
106 dB (LINE, IHF-A)
80 dB (PHONO, IHF-A)
80 dB (PHONO, IHF-A)
Speaker Impedance
4
Ω–16Ω or 6Ω–16Ω
Input Sensitivity/Output
Level and Impedance
Level and Impedance
1 Vp-p /75
Ω (Component and S-Video Y)
0.7 Vp-p /75
Ω (Component Pb/Cb,Pr/Cr)
0.28 Vp-p /75
Ω (S-Video C)
1 Vp-p /75
Ω (Composite)
Component Video
Frequency Response
Frequency Response
5 Hz – 50 MHz
Tuning Frequency
Range
Range
North American: 87.5 MHz– 107.9 MHz
Other: 87.5 MHz– 108.0 MHz
Other: 87.5 MHz– 108.0 MHz
Usable Sensitivity
Stereo: 22.2 dBf (IHF)
Mono: 15.2 dBf (IHF)
Mono: 15.2 dBf (IHF)
Signal to Noise Ratio
Stereo: 67 dB (IHF-A)
Mono: 73 dB (IHF-A)
Mono: 73 dB (IHF-A)
THD
Stereo: 0.5% (1 kHz)
Mono:0.3% (1 kHz)
Mono:0.3% (1 kHz)
Frequency Response
30 Hz–15 kHz / ±1 dB
Stereo Separation
40 dB (1 kHz)
Tuning Frequency
Range
Range
North American: 530 kHz–1710 kHz
European: 522 kHz–1611 kHz
Asian: 530/522 kHz–1710/1611 kHz
European: 522 kHz–1611 kHz
Asian: 530/522 kHz–1710/1611 kHz
Usable Sensitivity
300 µV/m
Signal to Noise Ratio
40 dB
THD
0.70%
Power Supply
North American: AC 120 V, 60 Hz
European: AC 230 V, 50 Hz
Others: AC 120/220-240 V, 50/60 Hz
European: AC 230 V, 50 Hz
Others: AC 120/220-240 V, 50/60 Hz
AC 220-230 V, 50/60 Hz
Power Consumption
North American: 7.5 A
European: 810 W
Others: 800
European: 810 W
Others: 800
W
860 W
Standby Power
Consumption
Consumption
North American: 0.2 W
Australian and European: 0.2 W
Others: 0.6 W
Australian and European: 0.2 W
Others: 0.6 W
Dimensions
(W
(W
×
H
×
D)
435
×
173.5
×
430 mm
17-1/8"
×
6-13/16"
×
16-15/16"
Weight
North American: 13.4 kg
29.5 lbs.
European: 13.6 kg
30.0 lbs.
Others:
13.4 kg
29.5 lbs.
29.5 lbs.
HDMI
IN1, IN2
Component
IN1, IN2, IN3
S-Video
DVD, VIDEO1, VIDEO2, VIDEO3,
VIDEO4
VIDEO4
Composite
DVD, VIDEO1, VIDEO2, VIDEO3,
VIDEO4
VIDEO4
HDMI
OUT
Component
OUT
S-Video
MONITOR OUT, VIDEO1, VIDEO2
Composite
MONITOR OUT, VIDEO1, VIDEO2
Digital Inputs
Optical: 5 (1 on Front Panel)
Coaxial: 2
Coaxial: 2
Analog Inputs
DVD (MULTICHANNEL), VIDEO1,
VIDEO2, VIDEO3, VIDEO4, TAPE, CD,
PHONO
VIDEO2, VIDEO3, VIDEO4, TAPE, CD,
PHONO
Multichannel Input
7.1 ch (DVD)
Digital Output
Optical: 1
Analog Outputs
TAPE, VIDEO1, VIDEO2, ZONE2
Multichannel Pre
Outputs
Outputs
7
Subwoofer Pre Outputs 1
Speaker Outputs
Speaker Outputs
L, R, C, SL, SR, SBL, SBR
ZONE2 (L, R)
ZONE2 (L, R)
Phones
1
RS232
1
IR Input/Output
1/1
12 V Trigger Out
ZONE2