ONKYO TX-SR8370 Manual Do Utilizador
90
Controlling Other Components
—Continued
You can program the remote controller’s MACRO but-
tons to perform a sequence of actions.
tons to perform a sequence of actions.
Example:
To play a CD, you typically need to perform the follow-
ing actions:
ing actions:
1. Press the [RECEIVER] REMOTE MODE button
to select the Receiver remote controller mode.
2. Press the [ON] button to turn on the AV receiver.
3. Press the [CD] INPUT SELECTOR button to
3. Press the [CD] INPUT SELECTOR button to
select the CD input source.
4. Press the [CD] REMOTE MODE button to select
the CD remote controller mode.
5. Press the Play [
] button to start playback on the
CD player.
You can program a MACRO button so that all five
actions are performed with just one button press.
actions are performed with just one button press.
Making Macros
You can make one macro for each MACRO button, and
each macro may contain up to eight commands.
each macro may contain up to eight commands.
Note:
• If one or more of the buttons you used to make a macro
are taught new commands, the macro will no longer
work properly and will have to be made again.
work properly and will have to be made again.
Running Macros
Deleting Macros
Using Macros
10
- - / - - -
11
12
REMOTE MODE
HDD
RECEIVER
TAPE/AMP
DVD
CD
ZONE2
SAT
TV
VCR
CABLE
MD
CDR
+
-
T V CH
T V VOL
ENTER
SET
UP
TO
P M
ENU
MEN
U
VOL
+
-
CH
DISPLAY
PREV
CH
DIMMER
SLEEP
MUTING
INPUT SELECTOR
3
2
MACRO
1
+10
0
CLEAR
1
2
3
4
5
6
7
8
9
INPUT
I
ON
STANDBY
T V
CD
V1
V2
V3
MULTI CH
DVD
TUNER
PHONO
DISC
ALBUM
V4
TAPE
RE
TURN
1
1, 3
Remote
indicator
indicator
1
While holding down the REMOTE
MODE button for the mode you
want to start with, press MACRO
button [1], [2], or [3].
MODE button for the mode you
want to start with, press MACRO
button [1], [2], or [3].
The Remote indicator lights up.
For the CD example in the left column,
you’d press and hold the [RECEIVER]
REMOTE MODE button, and then
press MACRO button [1], [2], or [3].
you’d press and hold the [RECEIVER]
REMOTE MODE button, and then
press MACRO button [1], [2], or [3].
2
On the remote controller, press
the buttons whose actions you
want to program into the macro
in the order you want them per-
formed.
the buttons whose actions you
want to program into the macro
in the order you want them per-
formed.
For the CD example in the left column,
you’d press the following buttons:
[ON], INPUT SELECTOR [CD],
REMOTE MODE [CD], Play [
you’d press the following buttons:
[ON], INPUT SELECTOR [CD],
REMOTE MODE [CD], Play [
].
3
When you’ve finished, press the
MACRO button again.
MACRO button again.
The Remote indicator flashes twice.
If you enter eight commands, the pro-
cess will finish automatically.
If you enter eight commands, the pro-
cess will finish automatically.
1
Press the MACRO [1], [2], or [3] button.
The commands in the macro are transmitted in the
order in which they were programmed. Keep the
remote controller pointed at the AV receiver until
all of the commands have been transmitted.
order in which they were programmed. Keep the
remote controller pointed at the AV receiver until
all of the commands have been transmitted.
Macros can be run at anytime regardless of the
current remote controller mode.
current remote controller mode.
1
While holding down the [RECEIVER]
REMOTE MODE button, press the MACRO
button whose macro you want to delete.
REMOTE MODE button, press the MACRO
button whose macro you want to delete.
2
Press the MACRO button again.
REMOTE MODE
HDD
RECEIVER
TAPE/AMP
DVD
CD
SAT
TV
VCR
CABLE
MD
CDR
TX-SR803_En.book Page 90 Friday, August 26, 2005 9:26 AM