ONKYO TX-SR8460 Manual Do Utilizador

First Time Setup

—Continued

HDMI Video Setup

If you connect a video component to HDMI IN 1 or 2,
you must assign that input to an input selector. For exam-
ple, if you connect your DVD player to HDMI IN 1, you
must assign HDMI IN 1 to the DVD input selector.

Note:
When HDMI IN 1 or 2 is assigned to an input selector
here, the digital audio input for that selector is automat-
ically set to HDMI IN 1 or 2. See “Digital Input” on
page 44.

Video Input

Press the [RECEIVER] button fol-
lowed by the [SETUP] button.

The main menu appears onscreen.

Use the Up and Down [

]/[

]

buttons to select “0. Video Input,”
and then press [ENTER].

The Video Input menu appears.

Use the Up and Down [

]/[

]

buttons to select an input selec-
tor, and use the Left and Right
[

]/[

] buttons to select:

(TX-SR604/604E/8460 only)

IN1: Select if the video component

is connected to HDMI IN 1.

IN2: Select if the video component

is connected to HDMI IN 2.

No: Select when not using the

HDMI output.

RECEIVER

SETUP

0.Video Input
------------------------
Component Video
a.DVD : IN1
b.VIDEO1 : ---
c.VIDEO2 : ---
d.VIDEO3 : ---
HDMI
e.DVD : No
f.VIDEO1 : No
g.VIDEO2 : No
h.VIDEO3 : No

(TX-SR674/674E/8467 only)

IN1: Select if the video component

is connected to HDMI IN 1.

IN2: Select if the video component

is connected to HDMI IN 2.

---: Output composite video,

S-Video, and component
video sources from the HDMI
OUT. The video output signal
from the HDMI OUT is the
one configured in “Compo-
nent Video Setup” (page 46).

Press the [SETUP] button.

Setup closes.

0.Video Input
------------------------
Component Video
a.DVD : IN1
b.VIDEO1 : ---
c.VIDEO2 : ---
d.VIDEO3 : ---
HDMI
e.DVD : ---
f.VIDEO1 : ---
g.VIDEO2 : ---
h.VIDEO3 : ---

SETUP