Manualsbrain.com
  1. Manuais
  2. Marcas
  3. ONKYO
  4. TX-SR8360
  5. Manual Do Utilizador

ONKYO TX-SR8360 Manual Do Utilizador

Download
Página de 92
 
46
 
First Time  Setup
 
—Continued
 
AM Frequency Step Setup
 
(some models only)
 
Here you can specify the AM frequency step used in 
your area. When this setting is changed, all radio presets 
are deleted.
 
Note:
 
This procedure can also be performed on the AV receiver 
by using its [SETUP] button, arrow buttons, and 
[ENTER] button.
Some of the settings in this section are set automatically 
by the Automatic Speaker Setup function (see page 39).
Here you can check the settings made by the Automatic 
Speaker Setup function, or set them manually, which is 
useful if you change one of the connected speakers after 
using the Automatic Speaker Setup function.
 
Speaker Configuration
 
Here you can specify which speakers are connected and 
their individual sizes.
For speakers with a cone diameter 
over 6-1/2 inches (16 cm), specify 
 
large,
 
 and for those with a diameter 
below this, specify 
 
small.
 
1
 
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
 
The main menu appears onscreen.
 
2
 
Use the Up and Down [
]/[
] 
buttons to select “0. Initial 
Setup,” and then press [ENTER].
 
The Initial Setup menu appears.
 
3
 
Use the Up and Down [
]/[
] 
buttons to select “i. AM Freq 
Step,” and then use the Left and 
Right [
]/[
] buttons to select:
 
10 kHz:
 
Select if 10 kHz steps are 
used in your area.
 
9 kHz:
 
Select if 9 kHz steps are used 
in your area.
 
4
 
Press the [SETUP] button.
 
The setup menu closes.
RECEIVER
ENTER
ENTER
ENTER
 
Speaker Setup
 
1
 
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
 
The main menu appears onscreen.
This setting is set automatically by the Automatic 
Speaker Setup function (see page 39).
Cone diameter
1, 11
2–10
2
1
RECEIVER