ONKYO TX-SR343 Manual Do Utilizador
Step 3: Playing Back
En-13
3
AM/FM Radio
The Basic Manual explains the method using automatic
tuning. For manual tuning, see the Advanced Manual.
1. Press TUNER on the remote controller several times
1. Press TUNER on the remote controller several times
to select either "AM" or "FM".
2. Press TUN MODE so that the "AUTO" indicator on
the display lights.
3. Press the
/
cursor buttons.
The automatic tuning to a radio station starts. Searching
stops when one is tuned. When tuned into a radio
station, the "
TUNED
" indicator on the display lights.
The "FM STEREO" indicator lights if the radio station is
an FM radio station.
● Alternatively you can press
TUNING
on the main
unit.
Actual display varies
depending on the country
TUNED
FM STEREO
AUTO
Registering a radio station: You can register up to 40 of
your favorite AM/FM radio stations.
1. Tune into the AM/FM radio station you want to register.
2. Press MEMORY on the remote controller so that the
1. Tune into the AM/FM radio station you want to register.
2. Press MEMORY on the remote controller so that the
preset number on the display flashes.
3. Press CH +/- several times to select a number between
1 and 40 while the preset number is flashing (about 8
seconds).
● Alternatively you can press
PRESET
on the main
unit.
4. Press MEMORY again to register the station.
When registered, the preset number stops flashing. To
select a preset radio station, press
PRESET
on the
main unit or CH +/− on the remote controller.
● To delete a preset station, after selecting the preset
station you want to delete, press MEMORY on the
remote controller, and with the preset number flashing
on the display, press CLR on the remote controller.
AM/FM frequency step setting
It may be necessary for you to change the
frequency step to tune the radio in your area.
Change the step with the following procedure. Note
that when this setting is changed, all radio presets
are deleted.
1 After pressing
1 After pressing
RECEIVER on the remote
controller, press SETUP.
2. Select "5. Hardware" with the cursor and press
ENTER.
3. Select "Tuner" with the cursor and press ENTER.
4. Select "AM / FM Frequency Step" (North
American and Taiwanese models) or "AM
Frequency Step" (European, Australian and
Asian models) with the cursor and select the
frequency step for your area.
(For Taiwanese models only)
The setting is "10 kHz / 0.2 MHz" at the time
of purchase. Please change it to "9 kHz /
0.05 MHz".
4
Quick Setup Menu
You can perform common settings on the TV screen while
playing.
1. Press Q on the remote controller.
1. Press Q on the remote controller.
The Quick Setup menu is displayed on the connected
TV's screen.
Quick Setup
Listening Mode
Audio
Information
Listening Mode
Audio
Information
MOVIE/TV
MUSIC
GAME
MUSIC
GAME
BD/DVD
2. Select the item with the cursors on the remote
controller and then press ENTER.
● To return to the previous screen, press RETURN.
3. Select the setting with the cursors of the remote
controller.
Listening Mode: Select the listening mode from the
categories of "MOVIE/TV", "MUSIC" and "GAME".
After selecting the Listening Mode, press ENTER button to
confirm.
● It cannot be set when audio is played from the TV's
speakers.
Audio You can perform various audio settings
including audio quality and speaker level adjustment.
● You cannot select this item when audio is output from
the TV's speakers.
Bass, Treble: Adjust volume of the front speaker.
Bass, Treble: Adjust volume of the front speaker.
● It cannot be set if the listening mode is Direct.
Phase Matching Bass: Suppress phase shift in the
midrange to enhance bass sound. Thus smooth and
powerful bass sound can be obtained.
● It cannot be set if the listening mode is Direct.
Center Level, Subwoofer Level: Adjust the speaker
level while listening to the sound. The adjustment you
made will be reset to the previous status when you turn
the unit to standby mode.
● Changes may not be possible depending on the
speaker settings.