ONKYO TX-SR343 Manual Do Utilizador

Advanced Settings (Setup Menu)

Dimension

0

Adjust the sound field setting for playing any 

2 ch digital source such as Dolby Digital or 2 ch 

analog/PCM source in the Dolby Pro Logic II 

Music listening mode. Select the depth of 

sound field.

"-3" to "+3": The sound field shifts forward as 

the set value becomes smaller than "0" and 

backward if the set value become larger than 

"0".

Center Width

3

Configure the setting to use for playing any 2 ch 

digital source such as Dolby Digital, or 2-ch 

analog/PCM source in the Dolby Pro Logic II 

Music listening mode. Adjust the width of the 

front sound field.

"0" to "7": The smaller the setting value is, the 

more concentrated in the center speaker is 

the sound, while the larger the setting value is, 

the more distributed to the front left and right 

speakers is the sound of the center speaker.

Loudness 

Management

On

Enable the Late Night function that allows 

you to enjoy surround sound of Dolby TrueHD 

playback even in low volume.

"On": Use this function

"Off": Do not use this function

Make the settings for DTS Neo:6 Music listening mode.

Neo:6 Music  

Center Image

2

Adjust the width of the sound field of the front 

channel when playing in the DTS Neo:6 Music 

listening mode.

"0" to "5": Selecting a smaller value brings the 

sound field of the front channel to the center 

while selecting a larger value spreads the 

sound field of the front channel to left and right.

Make the settings for Theater-Dimensional listening mode.

Listening Angle

Wide

To enhance the effect of Theater-Dimensional, 

select the actual angle of the left and right 

front speakers as it appears from the listening 

position.

"Narrow": Less than 30°

"Wide": Greater than 30°

● Position the front speakers 20° to the listening position if you have selected "Narrow" in "Listening 

Angle" and 40° if you have selected "Wide".

Make settings for input sources, such as volume difference adjustments for each input 

selector for the connected equipment. When you select a desired input to check the audio, 

start playback of the connected device.

IntelliVolume

0dB

Adjust the volume level difference between the 

devices connected to the unit. Select a value 

between "-12dB" and "+12dB". Set a negative 

value if the volume of the target device is larger 

than the others and a positive value if smaller.

Set an easy name to each input. The set name will be shown on the main unit display. 

Select the input selector to configure.

Name

---

Select a name registered in the unit and replace 

the currently selected input selector name with 

it.

● The same name cannot be used for more 

than one input selector.

● This cannot be set if the "TUNER" or "BLUETOOTH" input is selected.