ONKYO TX-SR343 Manual Do Utilizador

Operating Other Components with the Remote Controller

You can control any other device than this unit by 

programming a specified remote control code to a 

REMOTE MODE button of the remote controller. Register 

a remote control code to a desired REMOTE MODE button 

and press it to enter the remote mode that allows you to 

operate the corresponding device.

REMOTE MODE

RECEIVER

¼



1.  Look up the 

corresponding remote control code.

● The codes in the Remote Control Code List are those 

known as of the date of publication and may be 

changed.

● The following REMOTE MODE buttons are 

preprogrammed with remote control codes. 

BD/DVD: Onkyo Blu-ray Disc/DVD player 

CD: Onkyo CD player 

STRM BOX: Apple TV

● Only TV remote control codes can be entered for TV.

● Program a remote control code in accordance 

with the input since each button also works as the 

input selector. (For example, when the CD player 

is connected to the CD jack, program the remote 

control code for the CD player to CD)

2.  Press and hold DISPLAY for 3 or more seconds while 

holding down the REMOTE MODE button to which you 

want to program the remote control code.

● The remote indicator lights in the input mode.

3.  With the number buttons, enter the 5-digit remote control 

code within 30 seconds.

● Programming is complete when the remote indicator 

flashes twice. The remote indicator flashes once 

slowly when programming the remote control code 

fails. Try programming again.

¼



The colored button assignment on the AV receiver's remote 

controller can be remapped to match that on the remote 

controller of the component whose remote control code you 

programmed to REMOTE MODE.
1.  Hold down the REMOTE MODE button to map and A 

(Red) simultaneously until the remote indicator lights 

(about 3 seconds).

● Remapping is possible only for codes included in the 

categories of the Remote Control Code List (such as 

DVD player and TV)

2.  Within 30 seconds, press the colored buttons from left to 

right, in the order you want to remap.

● For example, if the colored buttons on the remote 

controller of the other component are yellow, green, 

blue, and red from left to right, press the buttons on 

the AV receiver's remote controller in that order.

● Programming is complete when the remote indicator 

flashes twice. The remote indicator flashes once 

slowly when programming the remote control code 

fails. Try programming again.

● Pressing any other button than a colored button 

cancels the remap operation.