ONKYO TX-SR674 Manual Do Utilizador

 

4

 

Replacement and mounting of an AC plug on the power 
supply cord of this unit should be performed only by 
qualified service personnel.

 

The wires in the mains lead are coloured in accordance 
with the following code:

Blue: Neutral
Brown: Live

As the colours of the wires in the mains lead of this 
apparatus may not correspond with the coloured mark-
ings identifying the terminals in your plug, proceed as 
follows:
The wire which is coloured blue must be connected to 
the terminal which is marked with the letter N or 
coloured black.
The wire which is coloured brown must be connected to 
the terminal which is marked with the letter L or 
coloured red.

 

The plug is fitted with an appropriate fuse. If the fuse 
needs to be replaced, the replacement fuse must 
approved by ASTA or BSI to BS1362 and have the 
same ampere rating as that indicated on the plug. Check 
for the ASTA mark or the BSI mark on the body of the 
fuse.
If the power cord’s plug is not suitable for your socket 
outlets, cut it off and fit a suitable plug. Fit a suitable 
fuse in the plug.

 

Make sure you have the following accessories:

 

  * In catalogs and on packaging, the letter at the end of the product 

name indicates the color. Specifications and operations are the 
same regardless of color.

Declaration  of  Conformity

We, ONKYO EUROPE

ELECTRONICS GmbH
LIEGNITZERSTRASSE 6, 
82194 GROEBENZELL, 
GERMANY

GROEBENZELL, GERMANY

ONKYO EUROPE ELECTRONICS GmbH

K. MIYAGI

declare in own responsibility, that the ONKYO product 
described in this instruction manual is in compliance with the 
corresponding  technical standards such as EN60065, 
EN55013, EN55020 and EN61000-3-2, -3-3.

 

Only supplied in certain countries. Use this adapter if 
your AC outlet does not match with the plug on the AV 
receiver’s power cord (adapter varies from country to 
country).