ONKYO TX-SR8440 Manual De Instruções

Página de 60
 
17
 
Enjoying Home Theater
 
You can use two sets of speakers with the AV receiver: 
 
speaker set A
 
 and 
 
speaker set B
 
.
 
Speaker set A
 
 should be used in your main listening room for up to 5.1-channel playback. 
 
*While speaker set B is on, speaker set A is reduced to 2.1-channel playback.
 
Speaker set B
 
 can be used in another room and offers 2-channel stereo playback. 
 
Speaker Sets A and B
 
Speaker set A
Speaker set B
Indicator
Output
 
On
On
Set A: 2.1 channels
Set B: 2 channels
Off
Set A: 5.1 channels
Off
On
Set B: 2 channels
Off
No sound
A   SPEAKERS   B
SP A / B
Remote
controller
AV receiver
or
A
B
A
B
Corner
1/3 wall 
length
Speaker Set A: Main Room
Front left and right speakers
These output the overall sound. Their role in a home theater is to provide a solid anchor for the sound 
image. They should be positioned facing the listener at about ear level, and equally spaced from the 
TV. Angle them inward.
Surround left and right speakers
These speakers are used for precise sound position-
ing and to add realistic ambience. Position them at the 
sides of the listener, or slightly behind, about 2–3 feet 
(60–100 cm) above ear level. Ideally they should be 
equally spaced from the listener.
* While speaker set B is on, these speakers output no 
sound.
Subwoofer
The subwoofer handles the bass 
sounds of the LFE (Low-Frequency 
Effects) channel. In general, a good 
bass sound can be obtained by 
installing the subwoofer in a front 
corner, or at one-third the way along 
the wall, as shown.
Speaker Set B: Sub Room
Center speaker
This speaker enhances the 
front left and right speakers, making 
sound movements distinct and providing 
a full sound image. For movies it’s used 
mainly for dialog.
Position it close to your TV facing forward 
at about ear level, or at the same height 
as the front left and right speakers.
* While speaker set B is on, this speaker 
outputs no sound.
TX-SR304_En.book Page 17 Tuesday, January 24, 2006 10:01 AM