ONKYO TX-8522 Manual Do Utilizador

Página de 36
 
25
 
Recording
 
—Continued
 
The signal flow in monitoring the recorded sound
The signal flow in monitoring the sound before 
recording
 
You can overdub audio onto your video recordings by 
simultaneously recording audio and video from two 
separate sources. This is possible because only the audio 
source is switched when an audio-only input source, 
such as TAPE, FM/AM, or CD, is selected, the video 
source remains the same.
In the following example, audio from the CD player 
connected to the CD IN jacks, and video from the 
camcorder connected to the DVD IN VIDEO jack are 
recorded by the VCR connected to the VIDEO OUT 
jacks.
T2 MONITOR OFF
TX-8522/TX-8222
T2 MONITOR ON
TAPE 2
TAPE 2 
button
Amplifier
PLAY
REC
Input source 
(CD, FM, etc.)
T2 MONITOR OFF
TX-8522/TX-8222
TAPE 2 
button
Amplifier
PLAY
REC
Input source 
(CD, FM, etc.)
 
Recording Audio and Video from 
Separate Sources (TX-8522 only)
 
1
 
Prepare the camcorder and CD player 
for playback.
 
2
 
Prepare the VCR for recording.
 
3
 
Press the [DVD] input selector button.
 
4
 
Press the [CD] input selector button.
 
This selects the CD player as the audio source, 
but leaves the camcorder as the video source.
 
5
 
Start recording on the VCR, then start 
playback on the camcorder and CD 
player.
 
Video from the camcorder and audio from the 
CD player are recorded by the VCR.
Camcorder
VCR
CD player
video signal
audio signal
TX-85228222_En.book 25 ページ 2006年5月4日 木曜日 午前11時51分