Manualsbrain.com
  1. Manuais
  2. Marcas
  3. ONKYO
  4. TX-SR604E
  5. Manual Do Utilizador

ONKYO TX-SR604E Manual Do Utilizador

Download
Página de 92
80
Zone 2
—Continued
To use Zone 2, you must make this setting. It enables the 
speakers connected to the ZONE 2 SPEAKERS termi-
nals so that they produce sound when Zone 2 is used.
Note:
This procedure can also be performed on the AV receiver 
by using its [SETUP] button, arrow buttons, and 
[ENTER] button.
Setting the Powered Zone 2
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
]/[
] 
buttons to select “8. Hardware 
Setup,” and then press [ENTER].
The Hardware Setup menu appears.
3
Use the Up and Down [
]/[
] 
buttons to select “Powered Zone 
2,” and use the Left and Right 
[
]/[
] buttons to select:
Not Act: ZONE 2 SPEAKERS termi-
nals deactivated.
Act: ZONE 2 SPEAKERS termi-
nals activated.
When Zone 2 is activated and turned on 
(see page 81), the speakers connected 
to the ZONE 2 SPEAKERS terminals 
output sound, but the speakers con-
nected to the SURROUND BACK 
SPEAKERS terminals do not (when 
Zone 2 is activated but not used, the 
surround back speakers work as nor-
mal).
SETUP
RECEIVER
8.Hardware Setup
------------------------
 a.SP Impedance :6ohms
 b.PoweredZone2:NotAct
 c.TV Format     :Auto
 d.AM Freq. Step: 9kHz
 e.Remote ID        :1
 f.HDMI Audio Out :Off
 g.SW Input Sensitivity
                 : 0dB
4
Press the [SETUP] button.
The setup menu closes.
SETUP