ONKYO tx-sr444 Manual Do Utilizador

Advanced Settings (Setup Menu)

Double Bass

On

This can be selected only when "Configuration" 

- "Subwoofer" is set to "Yes" and "Front" is set to 

"Large".

Boost bass output by feeding bass sounds from 

the front left and right, and center speakers to the 

subwoofer.

"On": Bass output will be boosted.

"Off": Bass output will not be boosted.

● The setting will not automatically be configured 

even if you performed the automatic speaker 

setup.

Set the distance from each speaker to the listening position. Settings are automatically 

configured if you use the automatic speaker setup.

Unit

feet/meters

Specify the unit of distance for configuring 

settings.

"feet": When setting in feet (0.1ft to 30.0ft, in 

increments of 0.1ft)

"meters": When setting in meters (0.03m to 

9.00m, in increments of 0.03m)

Front Left

12.0ft/3.60m

Specify the distance between each speaker and 

the listening position.

Center

12.0ft/3.60m

Specify the distance between each speaker and 

the listening position.

Front Right

12.0ft/3.60m

Specify the distance between each speaker and 

the listening position.

Height Left

9.0ft/2.70m

Specify the distance between each speaker and 

the listening position.

● The setting cannot be changed during ZONE 

B playback.

Height Right

9.0ft/2.70m

Specify the distance between each speaker and 

the listening position.

● The setting cannot be changed during ZONE 

B playback.

Surround Right

7.0ft/2.10m

Specify the distance between each speaker and 

the listening position.

Back Right

7.0ft/2.10m

Specify the distance between each speaker and 

the listening position.

● The setting cannot be changed during ZONE 

B playback.

Back Left

7.0ft/2.10m

Specify the distance between each speaker and 

the listening position.

● The setting cannot be changed during ZONE 

B playback.

Surround Left

7.0ft/2.10m

Specify the distance between each speaker and 

the listening position.

Subwoofer

12.0ft/3.60m

Specify the distance between each speaker and 

the listening position.

● Default values vary depending on the regions.

● The speaker "Distance" may be unable to be changed depending on the settings in "Configuration" - 

"Speaker Channels" / "Subwoofer".

Adjust the level of each speaker with the built-in test tone. Settings are automatically 

configured if you use the Automatic Speaker Setup.

Front Left

0dB

Select a value between "-12dB" and "+12dB". 

A test tone will be output each time you change 

the value. Select the desired level.

Center

0dB

Select a value between "-12dB" and "+12dB". 

A test tone will be output each time you change 

the value. Select the desired level.

Front Right

0dB

Select a value between "-12dB" and "+12dB". 

A test tone will be output each time you change 

the value. Select the desired level.

Height Left

0dB

Select a value between "-12dB" and "+12dB". 

A test tone will be output each time you change 

the value. Select the desired level.

● The setting cannot be changed during ZONE 

B playback.

Height Right

0dB

Select a value between "-12dB" and "+12dB". 

A test tone will be output each time you change 

the value. Select the desired level.

● The setting cannot be changed during ZONE 

B playback.