ONKYO TX-SR501E Manual Do Utilizador
22
Connecting Antenna
This chapter explains how to connect the supplied indoor FM
antenna and AM loop antenna, and how to connect commer-
cially available outdoor FM and AM antennas.
antenna and AM loop antenna, and how to connect commer-
cially available outdoor FM and AM antennas.
The supplied indoor FM antenna is for indoor use only.
If you cannot achieve good reception with the supplied
indoor FM antenna, try a commercially available outdoor FM
antenna instead (see page 23).
indoor FM antenna, try a commercially available outdoor FM
antenna instead (see page 23).
The supplied indoor AM loop antenna is for indoor use only.
If you cannot achieve good reception with the supplied
indoor AM loop antenna, try using it with a commercially
available outdoor AM antenna (see page 23).
indoor AM loop antenna, try using it with a commercially
available outdoor AM antenna (see page 23).
Connecting the Indoor FM Antenna
1
Attach the FM antenna, as shown.
■
North American Model
■
Other Models
Once your TX-SR501/TX-SR501E is ready for use,
you’ll need to tune into an FM radio station and
adjust the position of the FM antenna to achieve the
best possible reception.
you’ll need to tune into an FM radio station and
adjust the position of the FM antenna to achieve the
best possible reception.
2
Use thumbtacks or something similar to fix
the FM antenna into position.
the FM antenna into position.
Caution: Be careful that you don’t injure yourself
when using thumbtacks.
when using thumbtacks.
L
R
R
L
R
L
ANTENNA
FM
75
AM
FRONT
SPEAKERS A
FRONT
SPEAKERS B
SURROUND
SPEAKERS
CENTER
SPEAKER
R
L
SURROUND BACK
SPEAKER
REMOTE
CONTROL
CONTROL
IN
IN
IN
OPTICAL
COAXIAL
1
2
IN
IN
IN
IN
FRONT
SURR
CENTER
SUB
WOOFER
OUT
OUT
OUT
DIGITAL INPUT
VIDEO 2
VIDEO 1
DVD
MONITOR
OUT
VIDEO
S VIDEO
DVD
TAPE
CD
L
R
VIDEO 2
VIDEO 1
SUBWOOFER
PRE OUT
VIDEO 1
/ 2 / 3
IN
DVD IN
COMPONENT VIDEO
Y
PB
PR
OUT
L
R
SWITCHED
100W MAX.
100W MAX.
AC OUTLET
120 V
VOLTAGE
SELECTOR
220-230 V
AM antenna push terminals
FM antenna connector
FM antenna connector
FM
75
Insert the plug fully
into the socket.
into the socket.
FM
75
Insert the plug fully
into the socket.
into the socket.
Thumbtacks, etc.
Connecting the AM Loop Antenna
1
Assemble the AM loop antenna, inserting
the tabs into the base, as shown.
the tabs into the base, as shown.
2
Connect both wires of the AM loop antenna
to the AM push terminals, as shown.
to the AM push terminals, as shown.
(The antenna’s wires are not polarity sensitive, so
they can be connected either way around).
they can be connected either way around).
Make sure that the wires are attached securely and
that the push terminals are gripping the bare wires,
not the insulation.
that the push terminals are gripping the bare wires,
not the insulation.
Once your TX-SR501/TX-SR501E is ready for use,
you’ll need to tune into an AM radio station and
adjust the position of the AM antenna to achieve the
best possible reception. Keep the antenna as far away
as possible from your TX-SR501/TX-SR501E, TV,
speaker cables, and power cords.
you’ll need to tune into an AM radio station and
adjust the position of the AM antenna to achieve the
best possible reception. Keep the antenna as far away
as possible from your TX-SR501/TX-SR501E, TV,
speaker cables, and power cords.
AM
Push
Insert wire
Release