ONKYO TX-SR603/603E Manual Do Utilizador

 

37

 

With 

 (Remote Interactive) you can control your 

-compatible Onkyo CD player, DVD player, and so 

on with the AV receiver’s remote controller, as follows:

 

When you start playback on an AV component con-
nected via 

, if the AV receiver is in Standby, it will 

turn on and select that AV component as the input source 
automatically. Similarly, when the AV receiver is set to 
Standby, all components connected via 

 also enter 

Standby. Note that this function will not work if the com-
ponent’s power cord is connected to the AV receiver’s 
AC OUTLET.

 

When playback is started on an AV component con-
nected via 

, the AV receiver automatically selects 

that AV component as the input source.

 

You can control your 

-compatible Onkyo compo-

nents with the AV receiver’s remote controller.

 

• If you connect an 

-compatible Onkyo MiniDisc 

recorder or CD recorder to the TAPE IN/OUT jacks, 
for 

 to work properly, you must change the 

TAPE/MD/CDR display (see page 52).

• Push plugs in all the way to make good connections.
• Use only 

 cables for 

 connections. No 

 

cables are supplied with this AV receiver.

• Some AV components have two 

 jacks. You can 

connect either one to this AV receiver. The other jack 
is for connecting more 

-compatible components.

• Connect the AV receiver’s 

 jack to only Onkyo AV 

components. Connecting to other manufacturer’s AV 
components may cause them to malfunction.

• Some components may not support all 

 functions. 

Refer to the manuals supplied with your components.

The AV receiver has an AC outlet on its rear panel for 
connecting the power cord of another AV component.
The other component’s power switch can then be left in 
the ON position so that it turns on or off when the AV 
receiver is set to On or Standby.

 

Make sure that the capacity of the component that you 
connect to the AC OUTLET does not exceed the stated 
capacity (e.g., 100 W).

 

• Onkyo components with 

 jacks should be con-

nected directly to wall outlets, not the AV receiver’s 
AC OUTLET.

• The socket type and capacity will depend on the coun-

try in which you purchased the AV receiver.