Manualsbrain.com
  1. Manuais
  2. Marcas
  3. ONKYO
  4. TX-SR603/603E
  5. Manual Do Utilizador

ONKYO TX-SR603/603E Manual Do Utilizador

Download
Página de 92
 
51
 
First Time  Setup
 
—Continued
 
Equalizer Setting
 
Here you can adjust the EQ of individual speakers. To set 
the volume of individual speakers see page 50.
 
Note:
 
This procedure can also be performed on the AV receiver 
by using its [SETUP] button, arrow buttons, and 
[ENTER] button.
 
1
 
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
 
The main menu appears onscreen.
 
2
 
Use the Up and Down [
]/[
] 
buttons to select “5. Equalizer 
Settings,” and then press 
[ENTER].
 
The Equalizer Settings menu appears.
This setting is set automatically by the Automatic 
Speaker Setup function (see page 39).
1, 7
2–6
2
1
RECEIVER
ENTER
ENTER
 
3
 
Use the Left and Right [
]/[
] 
buttons to select:
 
Off:
 
Tone off, response flat.
 
Auto:
 
The tone for each speaker is 
set automatically by the 
Automatic Speaker Setup 
function.
 
Manual:
 
You can adjust the EQ of each 
speaker manually.
If you select Manual, continue with this 
procedure. If you select Off or Auto, go 
to step 7.
 
4
 
Use the Down [
] button to 
select “Channel,” and then use 
the Left and Right [
]/[
] but-
tons to select a speaker.
 
5
 
Use the Up and Down [
]/[
] 
buttons to select a frequency, 
and then use the Left and Right 
[
]/[
] buttons to adjust the 
level at that frequency.
 
The volume at each frequency can be 
adjusted from –6 to +6 dB in 1 dB 
steps.
 
Tip:
 
 Low frequencies (e.g., 80 Hz) 
affect bass sounds; high frequencies 
(e.g., 8 kHz) affect treble sounds.
 
6
 
Use the Up [
] button to select 
“Channel,” and then use the Left 
and Right [
]/[
] buttons to 
select another speaker.
 
Repeat steps 5 and 6 for each speaker.
 
7
 
Press the [SETUP] button.
 
The setup menu closes.
ENTER
ENTER
ENTER
ENTER