ONKYO TX-SR578 Manual Do Utilizador

En

You can specify the output resolution for the HDMI OUT 
and COMPONENT VIDEO MONITOR OUT and have 
the AV receiver upconvert the picture resolution as neces-
sary to match the resolution supported by your TV.

■

`

:

Select this to pass video through the AV receiver at 
the same resolution and with no conversion.

`

Auto:

Select this to have the AV receiver automatically 
convert video at resolutions not supported by your 
TV.

`

480p (480p/576p):

Select this for 480p or 576p output and video con-
version as necessary.

`

720p:

Select this for 720p output and video conversion as 
necessary.

`

1080i:

Select this for 1080i output and video conversion as 
necessary.

`

1080p:

Select this for 1080p output and video conversion as 
necessary.

If you connect a video component to an HDMI input, you 
must assign that input to an input selector. For example, if 
you connect your Blu-ray Disc/DVD player to HDMI 
IN 2, you must assign “HDMI2” to the “BD/DVD” input 
selector.
If you’ve connected your TV to the AV receiver with an 
HDMI cable, composite video and component video 
sources can be upconverted

*

 to HDMI. See “Video Con-

nection Formats” for more information on video signal 
flow and upconversion (

Here are the default assignments.

■

BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/
CD, PORT

`

HDMI1, HDMI2, HDMI3, HDMI4:

Select a corresponding HDMI input that the video 
component has been connected.

`

- - - - -:

Select this to output composite video and component 
video sources from the HDMI OUT. The video sig-
nal from HDMI output is configured in “Component 
Video Input” (

36). 

• Each HDMI input cannot be assigned to two input selec-

tors or more. When HDMI1 - HDMI4 have already 
been assigned, you must set first any unused input selec-
tors to “- - - - -” or you will be unable to assign HDMI1 
- HDMI4 to input selector.

• When an HDMI IN is assigned to an input selector as explained 

here, the digital audio input for that input selector is automati-
cally set to the same HDMI IN (

• TUNER selector cannot be assigned and is fixed at the “- - - - -” 

option.

• If you connect a component (such as UP-A1 Dock that seated 

iPod) to UNIVERSAL PORT jack, you cannot assign any input 
to PORT selector.

• Do not assign the component connected with the HDMI input to 

TV/CD selector when you set “TV Control” setting to “On” 
(

46). Otherwise, appropriate CEC (Consumer Electronics 

Control) operation will not be guaranteed.

Yes:

No:

b

a

c

a Menu selection
b Setting target
c Setting options (default setting underlined)

Select if a subwoofer is connected.

Select if no subwoofer is connected.

- - - - - (Fixed)

Composite video, 

component video

Composite video, 
component video

HDMI

HDMI