ONKYO TX-SR578 Manual Do Utilizador

En

Here you can specify the distance from each speaker to the 
listening position so that the sound from each speaker 
arrives at the listener’s ears as the sound designer 
intended.

■

`

feet:

Distances can be set in feet. Range: 1ft to 30ft in 
1 foot steps.

`

meters:

Distances can be set in meters. Range: 0.3m to 9.0m 
in 0.3 meter steps.

(The default setting varies from country to country.)

■

`

Specify the distance from the each speaker to your lis-
tening position.

• Speakers that you set to “No” or “None” in the 

“Speaker Configuration” cannot be selected (

37).

Here you can adjust the level of each speaker with the 
built-in test tone so that the volume of each speaker is the 
same at the listening position.

■

*1

`

–12dB to 0dB to +12dB in 1 dB step.

■

*1

`

 –15dB to 0dB to +12dB in 1 dB step.

• Speakers that you set to “No” or “None” in the 

“Speaker Configuration” cannot be selected (

37).

• Speakers that you set to “No” or “None” in the 

“Speaker Configuration” do not output the test tone (

37).

• The speakers cannot be calibrated while the AV receiver is 

muted.

*1

For the center speaker and subwoofer, the level settings made 
by using the Audio menu are saved here as the default settings 
(

• If you’re using a handheld sound level meter, adjust the level of 

each speaker so that it reads 75 dB SPL at the listening position, 
measured with C-weighting and slow reading.

■

`

Audyssey:

This is selected automatically by Audyssey 2EQ 
Room Correction and Speaker Setup function. The 
Audyssey Dvnamic Volume indicator will light 
(

8) and “Dynamic EQ” and “Dynamic Volume” 

become available (

`

Off:

No Audyssey 2EQ equalizing will apply.

• While the Direct or Pure Audio (European, Australian, and 

Asian models) listening mode is selected, this setting has no 
effect.

• Audyssey equalizing does not work for DSD sources.

With the Audio Adjust functions and settings, you can 
adjust the sound and listening modes as you like.

■

Multiplex
This setting determines which channel of a stereo multi-
plex source is output. Use it to select audio channels or 
languages with multiplex sources, multilingual TV 
broadcasts, and so on.

`

Main:

The main channel is output.

`

Sub:

The sub channel is output.

`

Main/Sub:

Both the main and sub channels are output.

■

Mono
This setting specifies the channel to be used for playing 
any 2-channel digital source such as Dolby Digital, or 
2-channel analog/PCM source in the Mono listening 
mode.

`

Left + Right:

Both the left and right channels are output.

`

Left:

Only the left channel is output.

`

Right:

Only the right channel is output.

This setting is set automatically by Audyssey 2EQ

®

 

Room Correction and Speaker Setup function (

22).

This setting is set automatically by Audyssey 2EQ 
Room Correction and Speaker Setup function (

22).

This setting is set automatically by Audyssey 2EQ 
Room Correction and Speaker Setup function (

22).