ONKYO TX-SR604/604E Manual Do Utilizador

78

When using progressive scanning on your DVD player, 
you may find that the picture and sound are out of sync. 
With this setting, you can correct this by delaying the 
audio signals. You can set it from 0 to 100 milliseconds 
(ms) in 10 millisecond steps.

Note:
This setting is not available when the Pure Audio listen-
ing mode is used, or the Direct listening mode is used 
with an analog input signal.

If several Onkyo components are used in the same room, 
the remote controller’s control codes may overlap with 
those of another component. To differentiate the remote 
controller’s control codes, you can change its ID to 
another number.

Note:
If you change the remote controller’s ID, be sure to set 
the same ID on both the remote controller and AV 
receiver (see “Changing the AV Receiver’s ID” on 
page 76). The default ID for both is 1.

This can be the [DVD], [VIDEO 1], 
[VIDEO 2], [VIDEO 3] or [VIDEO 4] 
input source.

The [RECEIVER] button lights up.

You can enter 1, 2, or 3.