ONKYO TX-DS494 Manual Do Utilizador

24

2. Using the TUNING a/s  buttons on the front

When you tune into a radio station, TUNED indicator appears
in the display. If you tune into an FM station in stereo, then FM
STEREO indicator lights up.

• The tuner frequency changes in 50 kHz increments for FM

and 10 kHz (or 9 kHz) increments for AM.

• When tuning into FM stations, you can press the TUNING

a

/s button continuously for more than 0.5 seconds to

scan for an FM station in the direction of the button you
pressed (FM auto tuning mode). After you release the
button and a station is received in stereo, the scanning
stops.

If the signal is weak or is too noisy, press the FM MODE
button to cancel the FM MUTE function. This turns the FM
MUTE indicator off and initiates the monaural reception
mode. In this mode, noise between stations is audible but
sound interruption experienced in the stereo reception mode is
removed.

To return to the stereo reception mode, press the FM MODE
button so that the FM MUTE indicator lights up.

When an RDS (Radio Data System) station broadcasting PS
(Program Service Name) information is received, the RDS
indicator lights up and the name of the station is displayed.

• RDS reception is only available on the European models, and

only in areas where RDS broadcasts are available.

FM and AM broadcasting can be received either by tuning into a
station or selecting a preset station.

PRESET a/s

5/∞

TUNING a/s

RC-443S

REMOTE

CONTROLLER