ONKYO TX-L55 Manual Do Utilizador
21
Connecting AV Components
—Continued
By connecting the audio and video outputs of your DVD player and other video components to the TX-L55, you can
select both the audio and video source simultaneously simply by selecting the appropriate input source on the TX-L55.
select both the audio and video source simultaneously simply by selecting the appropriate input source on the TX-L55.
The TX-L55 supports several connection formats for compatibility with a wide range of AV equipment. The format you
choose will depend on the formats supported by your other components. Use the following sections as a guide.
For video components, you must make two connections—one for the audio, one for the video.
choose will depend on the formats supported by your other components. Use the following sections as a guide.
For video components, you must make two connections—one for the audio, one for the video.
Video Connection Formats
Video equipment can be connected to the TX-L55 by
using one of the following video connection formats:
composite video, S-Video, or component video, the lat-
ter offering the best picture quality.
When choosing a connection format, bear in mind that
the TX-L55 doesn’t convert between formats, so only
outputs of the same format as the input will output the
signal.
For example, if you connect your DVD player to the
S DVD IN, a video signal will be output by the
S MONITOR OUT (for your TV), but not by any com-
posite video or component video outputs.
using one of the following video connection formats:
composite video, S-Video, or component video, the lat-
ter offering the best picture quality.
When choosing a connection format, bear in mind that
the TX-L55 doesn’t convert between formats, so only
outputs of the same format as the input will output the
signal.
For example, if you connect your DVD player to the
S DVD IN, a video signal will be output by the
S MONITOR OUT (for your TV), but not by any com-
posite video or component video outputs.
Audio Connection Formats
Audio equipment can be connected to the TX-L55 using
the following audio connection formats: analog, optical,
coaxial, and multichannel.
When choosing a connection format, bear in mind that
the TX-L55 doesn’t convert between formats.
For example, audio signals connected to an OPT or
COAX digital input are not output by the analog
VIDEO 1 AUDIO OUT, so if you want to record from,
for example, your CD player, in addition to connecting it
to a digital input, you must also connect it to the analog
AUX IN.
the following audio connection formats: analog, optical,
coaxial, and multichannel.
When choosing a connection format, bear in mind that
the TX-L55 doesn’t convert between formats.
For example, audio signals connected to an OPT or
COAX digital input are not output by the analog
VIDEO 1 AUDIO OUT, so if you want to record from,
for example, your CD player, in addition to connecting it
to a digital input, you must also connect it to the analog
AUX IN.
Connecting Both Audio & Video
Speakers (see page 16 for connection
information)
information)
TX-L55
: Signal Flow
DVD player, etc.
TV
Video
Video
Audio
Audio
Which Connections Should I Use?
DVD player,
etc.
TV,
projector,
etc.
Output
Input
IN
OUT
Composite
S-Video
Component
Composite
S-Video
Component
Composite
S-Video
Component
TX-L55
MD recorder,
etc.
DVD player,
etc.
Output
Input
IN
OUT
Optical Coaxial Analog
Multi-
channel
channel
Not
Not
Not
output
output
output
Analog
Optical
Coaxial
Analog
Multi-
channel
channel
TX-L55
TX-L55_En.book Page 21 Tuesday, June 1, 2004 9:02 AM