ONKYO TX-L55 Manual Do Utilizador

 

54

 

The following Panorama, Dimension, and Center Width 
functions can be used with only the Pro Logic II Music 
or Pro Logic IIx Music listening mode. They cannot be 
adjusted if you’re using the Pro Logic IIx listening mode 
for 6.1-channel playback from a 5.1-channel source.

 

■

 

With this function you can broaden the width of the front 
stereo image when using the Pro Logic II Music or Pro 
Logic IIx Music listening mode.

 

Panorama function on.

 

Panorama function off (default).

 

■

 

With this function you can move the sound field forward 
or backward when using the Pro Logic II Music or Pro 
Logic IIx Music listening mode. The default setting is 3. 
Lower settings move the sound field forward. Higher set-
tings move it backward.
If the stereo image feels too wide, or there’s too much 
surround sound, move the sound field forward to 
improve the balance. Conversely, if the stereo image 
feels like it’s in mono, or there’s not enough surround 
sound, move it backward.

 

■

 

With this function you can adjust the width of the sound 
from the center speaker when using the Pro Logic II 
Music or Pro Logic IIx Music listening mode.
If you’re using a center speaker, with Pro Logic II or Pro 
Logic IIx, the center channel sound is output by only the 
center speaker. (If you’re not using a center speaker, the 
center channel sound will be distributed to the front left 
and right speakers to create a phantom center.) This set-
ting controls the front left, right, and center mix, 
allowing you to adjust the weight of the center channel 
sound. It can be adjusted from 0 to 7 (default 3).

TX-L55_En.book Page 54 Tuesday, June 1, 2004 9:02 AM