ONKYO SKC-960C Manual Do Utilizador
50
Playing Your AV Components
Basic AV Receiver Operation
ON/STANDBY
STANDBY
A SPEAKERS B
TONE
MOVIE/TV
LISTENING MODE
MUSIC
GAME
DISPLAY
MEMORY
CLEAR
DIGITAL INPUT
TUNING MODE
PHONES
MULTI CH
THX
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
SETUP MIC
VIDEO
L AUDIO R
AUX INPUT
ENTER
RETURN
TUNING
PRESET
MASTER VOLUME
AV RECEIVER
HT-R960
RT/PTY/TP
4
1
4
1
4
Subwoofer’s
rear panel
1
Use the AV receiver’s input selector buttons to select an input source.
To select an input source with the remote controller, use its INPUT
SELECTOR buttons.
SELECTOR buttons.
To listen to a DVD player connected to the multichannel DVD input (page 30), press
the AV receiver’s [MULTI CH] button. The MULTI CH indicator will appear on the
display.
the AV receiver’s [MULTI CH] button. The MULTI CH indicator will appear on the
display.
Note:
• While the multichannel DVD input is selected, the Speaker Configuration settings on
2
To turn the speakers on or off, use the AV receiver’s SPEAKERS [A] and
[B] buttons, or press the [RECEIVER] REMOTE MODE button on the
remote controller and use its [SP A/B] button.
[B] buttons, or press the [RECEIVER] REMOTE MODE button on the
remote controller and use its [SP A/B] button.
Pressing the remote controller’s [SP A/B] button cycles through the following settings:
Speaker Set A
Speaker Set A
→
Speaker Set A&B
→
Speaker Set B
→
Off.
Note that while speaker set B is on, speaker set A
is reduced to 5.1-channel playback.
See page 19 for more information about speaker
sets A and B.
is reduced to 5.1-channel playback.
See page 19 for more information about speaker
sets A and B.
3
Start playback on the source component.
To watch a DVD or other video source, on your TV, select the video input that’s con-
nected to the AV receiver’s HDMI OUT, COMPONENT VIDEO OUT, or MONITOR
OUT. On some DVD players, you may need to change the digital or HDMI audio out-
put settings.
nected to the AV receiver’s HDMI OUT, COMPONENT VIDEO OUT, or MONITOR
OUT. On some DVD players, you may need to change the digital or HDMI audio out-
put settings.
4
To adjust the volume, use the MASTER VOLUME control or the remote
controller’s [VOL] button.
controller’s [VOL] button.
Since the AV receiver is designed for home theaters, it has a wide volume range for
precise adjustment. The volume can be set to –
precise adjustment. The volume can be set to –
∞
dB, –81 dB, –80 dB through +18 dB.
Make sure the SKW-960 Subwoofer’s output level control is set at the
“THX-POSITION.”
“THX-POSITION.”
Because our ears are less sensitive to very low bass sounds, there’s a temptation to set
the level of the subwoofer too high. As a rule of thumb, set the subwoofer level to what
you think is the optimal level, and then back it off slightly.
the level of the subwoofer too high. As a rule of thumb, set the subwoofer level to what
you think is the optimal level, and then back it off slightly.
5
Select a listening mode and enjoy!
DVD
VCR/DVR CBL/SAT
AUX
TAPE
TUNER
CD
Remote
controller
AV receiver
A
B
SPEAKERS
Remote
controller
AV receiver
Indicators
Remote
controller
AV receiver
MASTER VOLUME
HT-S9100THX_En.book Page 50 Friday, June 27, 2008 4:00 PM