ONKYO SR805 Manual Do Utilizador

 

100

 

• HDMI power control only works with HDMI-compat-

ible components that support it and may not work 
properly with some components due to their settings 
or compatibility.

• When set to Enable, the AV receiver consumes more 

power.

• When set to Enable, the AV receiver enters Ready 

mode when set to Standby, and the READY indicator 
lights up instead of the STANDBY indicator (not 
North American model).

 

Select Enable to control the AV receiver from an RIHD-
compatible TV connected via HDMI.

 

 TV Control disabled.

 

TV Control enabled.

 

• Select Disable if your TV is incompatible or you’re 

note sure about its compatibility.

• The TV Control setting can be set only when the above 

Control and Power Control settings are both set to 
Enable.

 

With this setting, you can protect your settings by lock-
ing the setup menus.

 

Setup menus locked.

 

Setup menus unlocked.

When Locked is selected, only this Lock Setup item can 
be accessed.

Note:
• After changing the Control, Power Control, or TV 

Control setting, be sure to turn all of your compo-
nents off and then back on again. Refer to the 
instruction manuals for your other components.

TX-SR805_875_En.book Page 100 Thursday, April 26, 2007 3:00 PM