ONKYO SR805 Manual Do Utilizador
29
Connecting Your Components
—Continued
■
HDMI Monitor Setting Set to No
With the HDMI Monitor setting set to No (see
page 46), video input signals flow through the
AV receiver as shown, with composite video
and S-Video sources being upconverted for the
component video output. Use this setting if you
connect the AV receiver’s COMPONENT
VIDEO OUT to your TV.
page 46), video input signals flow through the
AV receiver as shown, with composite video
and S-Video sources being upconverted for the
component video output. Use this setting if you
connect the AV receiver’s COMPONENT
VIDEO OUT to your TV.
Composite video is upconverted to S-Video
and S-Video is downconverted to composite
video. Note that these conversions only apply
to the MONITOR OUT V and S outputs, not
the VCR/DVR OUT V and S outputs.
and S-Video is downconverted to composite
video. Note that these conversions only apply
to the MONITOR OUT V and S outputs, not
the VCR/DVR OUT V and S outputs.
The composite video, S-Video, and component
video pass through their respective input sig-
nals as they are.
video pass through their respective input sig-
nals as they are.
On the TX-SR875, this signal flow also applies
when the Monitor Out Resolution setting is set
to Through (see page 46).
when the Monitor Out Resolution setting is set
to Through (see page 46).
Video Signal Flow and the Resolution Setting
On the TX-SR875, when the HDMI Monitor
setting is set to No (see page 46), if the Monitor
Out Resolution setting is set to anything other
than Through (see page 46), the video signal
flow will be as shown here, with composite
video and S-Video sources being upconverted
for the component video output.
setting is set to No (see page 46), if the Monitor
Out Resolution setting is set to anything other
than Through (see page 46), the video signal
flow will be as shown here, with composite
video and S-Video sources being upconverted
for the component video output.
The composite video, S-Video, and component
video outputs pass through their respective
analog input signals as they are. HDMI input
signals are not output.
video outputs pass through their respective
analog input signals as they are. HDMI input
signals are not output.
Audio Connection Formats
Audio equipment can be connected to the AV
receiver by using any of the following audio
connection formats: analog, optical, coaxial,
analog multichannel, or HDMI.
receiver by using any of the following audio
connection formats: analog, optical, coaxial,
analog multichannel, or HDMI.
When choosing a connection format, bear in
mind that the AV receiver does not convert dig-
ital input signals for analog line outputs and
vice versa. For example, audio signals con-
nected to an optical or coaxial digital input are
not output by the analog TAPE OUT.
mind that the AV receiver does not convert dig-
ital input signals for analog line outputs and
vice versa. For example, audio signals con-
nected to an optical or coaxial digital input are
not output by the analog TAPE OUT.
IN
MONITOR OUT
DVD player, etc.
AV receiver
TV, projector, etc.
Composite
S-Video
Component
Video Signal Flow Chart
HDMI
Composite
S-Video
Component
HDMI
IN
MONITOR OUT
DVD player, etc.
AV receiver
TV, projector, etc.
Composite
S-Video
Component
Video Signal Flow Chart
HDMI
Composite
S-Video
Component
DVD player, etc.
AV receiver
MD recorder, etc.
Optical
Optical
Coaxial
Analog
Analog
Multichannel
Audio Signal Flow Chart
HDMI
HDMI
1 Depends on the HDMI Audio setting (see page 99).
2 Only the front L/R channels are output.
2 Only the front L/R channels are output.
*
*
*
TX-SR805_875_En.book Page 29 Thursday, April 26, 2007 3:00 PM